Re: STRPASTHR sessions via AnyNet timeouts (CPF8907)

[Neil Palmer <neilp@xxxxxxxxxxx>]

I'll check, but it's not that it's unsuccessful, it works perfectly in 
that the connection is established, SNADS can send/receive files OK, 
STRPASTHR works, etc.  It's just a timeout after 5 or 6 minutes with 
STRPASTHR.

...Neil




Marc Rauzier <mrauzier@xxxxxxx> 
Sent by: midrange-l-bounces@xxxxxxxxxxxx
2003/12/07 03:13



To

cc

Subject







Le sam. 06 déc. 2003 18:25:23, Neil Palmer écrivait:

> We have a few customers with Internet connections that have
> allowed only port 397 for AnyNet to come in to their iSeries, and
> only from the specific IP address of our system.  We therefore
> have to use STRPASTHR to get an interactive session on their
> system, and SNADS also runs via AnyNet.  We have no problem with
> SNADS - files are sent without problem, but the interactive
> sessions seem to constantly "timeout" after several minutes and
> the session is ended (with a CPF8907 at the originating system). 
> Has anyone found a way to prevent this timeout problem with 
> STRPASTHR via AnyNet? 

Neil,

Both TCP and UDP protocols for the 397 port must be open in the two 
ways for Anynet to be succesfull thru a firewall.

-- 
Cordialement/Best regards
Marc Rauzier