Re: Lexmark X6170

["Cynthia Goodden" <ckovarik@xxxxxxxxxxxxx>]

Hello Paul ... thank you for your response.

I have tried that but results are pretty much illegible font wise ...
however ... this setup does understand a portrait vs. landscape orientation
print job which is more than other options I have tried!  Any other ideas?
I sent an email to Lexmark support but have yet to hear back from them.

Thanks again Paul!

TIA
CMG
----- Original Message ----- 
From: "Paul Tykodi" <p.tykodi@xxxxxxxxxxxxxxx>
To: <midrange-l@xxxxxxxxxxxx>
Sent: Wednesday, November 19, 2003 4:49 PM
Subject: Re: Lexmark X6170


> Dear Cynthia,
>
> If you were to configure a Client Access PC5250 print session that was not
> using Host Print Transform (uncheck the box Transform Print Data to ASCII
> on AS/400), the OS/400 EBCDIC data would be transferred natively from the
> iSeries or AS/400 host to the PC running Client Access Express. If you
also
> make sure that you do not select the Use PDT checkbox, CAE will convert
> your EBCDIC data into a Windows format known as GDI on the PC running
> CAE.
>
> The GDI format is the generic input format required by Windows print
> drivers.
> By selecting this configuration, you will be able to use the Lexmark
Windows
> print driver to format the iSeries or AS/400 data and hopefully some
> printing
> will then occur.
>
> HTH
>
> Best Regards,
>
> /Paul
> --
> Paul Tykodi
> National Product Manager
> Print4sight Inc.
>
> p: 603-431-0606 x115
> f: 603-436-6432
> E-mail: p.tykodi@xxxxxxxxxxxxxxx
> www.print4sight.com
>
> >date: Tue, 18 Nov 2003 18:35:56 -0500
> >from: "Cynthia Goodden" <ckovarik@xxxxxxxxxxxxx>
> >subject: Lexmark X6170
> >
> >Has anyone had any luck in getting a Lexmark X6170 to print from CAE?
I've
> tried just     >about every PDT and/or transform option to no avail.  Any
> and all help would be greatly    >appreciated!
>
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>
>