RE: SNA over TCP/IP

Carl,

I am doing an 830 - 870 upgrade this weekend and have been told I will need
AnyNet to do SNA over 1 GB Ethernet.........We are moving from 100 Mb to 1
GB as part of the upgrade process.

Regards,

Mike Shaw

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Carl Galgano
Sent: Wednesday, June 11, 2003 4:55 AM
To: 'Midrange Systems Technical Discussion'
Subject: RE: SNA over TCP/IP

Werner:
You do not need to configure anynet to use SNADS over Ethernet.  If your
AS400s are on the same LAN, then you just configure the APPC controller
(type *LAN).  SNA over Ethernet requires you use the MAC address of the
Ethernet card.  That is how the addressing is done.  

If it is over a WAN and you are using CISCO routers, you can use dlsw to
route the SNA over the IP network.  Again, ANYNET is not required.

cjg

Carl J. Galgano
EDI Consulting Services, Inc.
550 Kennesaw Avenue, Suite 800
Marietta, GA  30060
(770) 422-2995 - voice
(419) 730-8212 - fax
mailto:cgalgano@xxxxxxxxxxxxxxxxx
http://www.ediconsulting.com
AS400 EDI, Networking, E-Commerce and Communications Consulting and
Implementation 
http://www.icecreamovernight.com
Premium Ice Cream Brands shipped Overnight

"You ain't gonna learn what you don't want to know" - rw



Hi All,

I'll have a discussion with a customer about the best methods of data
transfer between two iSeries systems. The systems are already connected by
TCP/IP. The issue is to transfer periodically files from one system to the
other. In the past we already used SNADS functions as well as FTP. I
personally prefer SNADS, which would require the Anynet-Support. In previous
postings I read something about a slow down when Anynet is used (in
comparison with pure SNA or pure TCP/IP). Would this be remarkable? Does
Anynet realy slow down also the interactive traffic on a TCP/IP line? Many
thanks for any arguments pros and cons. 
Regards,
GEFIS Gesellschaft für
Individual-Software mbH
Werner Noll


_______________________________________________


_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.