Re: Printer error -- MIDRANGE-L

describe your whole config for this. are you using PSF?
Is this emulating something else?
I had similar problem with a Kyocera till they tinkered with it for several
months.
jim
----- Original Message -----
From: "Mark Allen" <mallen@xxxxxxxx>
To: "'Midrange Systems Technical Discussion'" <midrange-l@xxxxxxxxxxxx>
Sent: Thursday, May 15, 2003 2:26 PM
Subject: RE: Printer error


> Per Konica with the Net Fusion card it will support IPDS
>
> Can't use rmtoutq need to be able to start/reprint at specific page
>
> It works for a while like 50-60 pages that hangs
>
> -----Original Message-----
> From: midrange-l-bounces@xxxxxxxxxxxx
> [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jim Franz
> Sent: Thursday, May 15, 2003 2:20 PM
> To: Midrange Systems Technical Discussion
> Subject: Re: Printer error
>
>
> if the printer does not support PJL, then you cannot use *lan. that will
> cause the "communication error". Try rmtoutq. jim
>
> ----- Original Message -----
> From: "Mark Allen" <mallen@xxxxxxxx>
> To: "'Midrange Systems Technical Discussion'" <midrange-l@xxxxxxxxxxxx>
> Sent: Thursday, May 15, 2003 1:42 PM
> Subject: RE: Printer error
>
>
> > Force 75
> >
> > *lan
> >
> > Did find one thing in IBM Knowledge base about possible problem if
> > printer time out lower than AS/400 TCP Keep alive value, changed the
> > printer to be higher, testing now
> >
> > -----Original Message-----
> > From: midrange-l-bounces@xxxxxxxxxxxx
> > [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jim Franz
> > Sent: Thursday, May 15, 2003 1:24 PM
> > To: Midrange Systems Technical Discussion
> > Subject: Re: Printer error
> >
> >
> > Which Konica?
> > Knowlege Base doc lists Konica 7150 does not support PJL, so are you
> > using *lan or rmtoutq config? jim
> >
> > ----- Original Message -----
> > From: "Mark Allen" <mallen@xxxxxxxx>
> > To: "'Midrange Systems Technical Discussion'"
> > <midrange-l@xxxxxxxxxxxx>
> > Sent: Thursday, May 15, 2003 12:52 PM
> > Subject: RE: Printer error
> >
> >
> > > Yeah looked there nothing excep started, did not end normally
> > >
> > > -----Original Message-----
> > > From: midrange-l-bounces@xxxxxxxxxxxx
> > > [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Carl Galgano
> > > Sent: Thursday, May 15, 2003 12:43 PM
> > > To: 'Midrange Systems Technical Discussion'
> > > Subject: RE: Printer error
> > >
> > >
> > > Did you check the joblog of the writer job.  I think if you do a
> > > wrkjob PRTF75 you should show the writer job.  Take a look at it's
> > > job
> >
> > > log for more info. cjg
> > >
> > > Carl J. Galgano
> > > EDI Consulting Services, Inc.
> > > 550 Kennesaw Avenue, Suite 800
> > > Marietta, GA  30060
> > > (770) 422-2995 - voice
> > > (419) 730-8212 - fax
> > > mailto:cgalgano@xxxxxxxxxxxxxxxxx http://www.ediconsulting.com AS400
>
> > > EDI, Networking, E-Commerce and Communications Consulting and
> > > Implementation http://www.icecreamovernight.com
> > > Premium Ice Cream Brands shipped Overnight
> > >
> > > "You ain't gonna learn what you don't want to know" - rw
> > >
> > > -----Original Message-----
> > > From: midrange-l-bounces@xxxxxxxxxxxx
> > > [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Mark Allen
> > > Sent: Thursday, May 15, 2003 11:51 AM
> > > To: midrange-l@xxxxxxxxxxxx
> > > Subject: Printer error
> > >
> > >
> > > Anyone know where I can find what the error code 20 really means.
> > > Obviously 20-39 mean different things but where can I find what they
>
> > > are?
> > >
> > >                          Additional Message Information
> > >
> > >
> > >
> > >  Message ID . . . . . . :   PQT3621       Severity . . . . . . . :
> > 40
> > >
> > >  Message type . . . . . :   Information
> > >
> > >  Date sent  . . . . . . :   05/15/03      Time sent  . . . . . . :
> > > 11:44:30
> > >
> > >
> > >  Message . . . . :   The session with device PRTF75 ended
> abnormally.
> > >
> > >  Cause . . . . . :   The session with device PRTF75 at RMTLOCNAME
> > >
> > >    207.144.134.232, using PORT 5001, ended abnormally.  The error
> > > code
> >
> > > is 20,
> > >    which indicates one of the following conditions:
> > >
> > >      20-39: A communications failure occurred.
> > >
> > >      40-59: An internal failure occurred.
> > >
> > >  Recovery  . . . :   For error codes 20-39, check for problems in
> your
> > > network.
> > >    After correcting the problem, start the printer writer to begin
> > > processing
> > >    files again. If the problem continues, report it using the ANZPRB
>
> > > command.
> > >    For error codes 40-59, start the printer writer again. If the
> > > problem
> > >
> > >    continues, report it using the ANZPRB command.
> > >
> > >  Technical description . . . . . . . . :   The internal message
> > > identifier (ID)
> > >
> > > More...
> > >  Press Enter to continue.
> > >
> > >
> > >
> > >  F3=Exit   F6=Print   F9=Display message details   F12=Cancel
> > >
> > >  F21=Select assistance level
> > >
> > >
> > >
> > >
> > > Mark Allen
> > > IS Manager
> > > Wilkes Telephone & Electric
> > > 11 W. Court Street
> > > Washington, GA 30673
> > > Phone: (706) 678-9565
> > > Fax: (706) 678-1000
> > >
> > >
> > > _______________________________________________
> > > This is the Midrange Systems Technical Discussion (MIDRANGE-L)
> > > mailing
> >
> > > list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
> > > unsubscribe, or change list options,
> > > visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> > > or email: MIDRANGE-L-request@xxxxxxxxxxxx
> > > Before posting, please take a moment to review the archives at
> > > http://archive.midrange.com/midrange-l.
> > >
> > >
> > > _______________________________________________
> > > This is the Midrange Systems Technical Discussion (MIDRANGE-L)
> > > mailing
> >
> > > list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
> > > unsubscribe, or change list options,
> > > visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> > > or email: MIDRANGE-L-request@xxxxxxxxxxxx
> > > Before posting, please take a moment to review the archives at
> > > http://archive.midrange.com/midrange-l.
> > >
> > > _______________________________________________
> > > This is the Midrange Systems Technical Discussion (MIDRANGE-L)
> > > mailing
> > list
> > > To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> > > To subscribe, unsubscribe, or change list options,
> > > visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> > > or email: MIDRANGE-L-request@xxxxxxxxxxxx
> > > Before posting, please take a moment to review the archives at
> > > http://archive.midrange.com/midrange-l.
> > >
> > >
> >
> >
> > _______________________________________________
> > This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
>
> > list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
> > unsubscribe, or change list options,
> > visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> > or email: MIDRANGE-L-request@xxxxxxxxxxxx
> > Before posting, please take a moment to review the archives at
> > http://archive.midrange.com/midrange-l.
> >
> > _______________________________________________
> > This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list
> > To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> > To subscribe, unsubscribe, or change list options,
> > visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> > or email: MIDRANGE-L-request@xxxxxxxxxxxx
> > Before posting, please take a moment to review the archives at
> > http://archive.midrange.com/midrange-l.
> >
> >
>
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
> unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>