RE: UTC Setting (was: Service message: Daylight saving timestart s)

["DeLong, Eric" <EDeLong@xxxxxxxxxxxxxxx>]

It mostly affects things like MSF and Management Central.  It's not uncommon
for shops to have neglected the UTC offset.  

Eric DeLong
Sally Beauty Company
MIS-Project Manager (BSG)
940-898-7863 or ext. 1863



-----Original Message-----
From: Tom Jedrzejewicz @ San Pedro [mailto:TJedrzejewicz@xxxxxxxxxxxx]
Sent: Thursday, March 27, 2003 1:48 PM
To: midrange-l@xxxxxxxxxxxx
Subject: UTC Setting (was: Service message: Daylight saving time starts)


I am a dolt sometimes, so a bit of help would be appreciated.

When DST starts here (West Coast USA), the time will move ahead 1 hour.
 And a +0100 change to the UTC offset is also required.

On my system, the UTC offset is set to 00:00; it has apparently never
been properly set/maintained.  I believe that my UTC should currently by
-8:00 and should be -07:00 after DST starts.  What problems can I expect
from the UTC not properly set for my system?

Thanks!

>>> Bob2@xxxxxxxxxxxxxx 03/27/03 10:32AM >>>
And for most Hosiers (Residents of Indiana), there is no change!

Bob

> -----Original Message-----
> From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-
> bounces@xxxxxxxxxxxx] On Behalf Of Henrik Krebs
> Sent: Wednesday, March 26, 2003 3:21 PM
> To: midrange-l@xxxxxxxxxxxx 
> Subject: Service message: Daylight saving time starts (Australians:
> ends)
> 
> Hi
> 
> Just in case that you have forgot about DST - Daylight saving time
> (In Europe: Summer time): Your AS/400 should probably have changed
> it's system values for QTIME and QUTCOFFSET the upcoming weekend
(US:
> on Apr 6).
> 
> A simple way to do this is (already now) to execute the following
> commands
> 
> SBMJOB CMD(CHGSYSVAL SYSVAL(QHOUR) VALUE(03))
>   JOB(CHGSYSVAL1) JOBQ(QCTL)
>   SCDDATE(*SUN) SCDTIME(020000)
> 
> and
> 
> SBMJOB CMD(CHGSYSVAL SYSVAL(QUTCOFFSET) VALUE('+0200'))
>   JOB(CHGSYSVAL2) JOBQ(QCTL)
>   SCDDATE(*SUN) SCDTIME(020000)
> 
> Of cause the values in theese commands might differ from above
> depending on your location and environment. Above values applies for
> most of Europe.
> In Finland and Baltic countries the SCDTIME should be 030000 and
> QHOUR and QUTCOFFSET 04 and '+0300'
> UK and Portugal: 010000, 02 and '+0100'
> 
> In USA this you have another week to do this, so you can use Apr 6
as
> SCDDATE (in correct format for your system). The SCDTIME is always
> 020000 but the QUTCOFFSET varies from '-0300' to '-0800'
> 
> If you are unsure the values appropriate for your system, then have
a
> look at http://www.timeanddate.com/time/dst2003a.html 
> 
> 
> 
> Regards
> 
> Henrik Krebs
> Web: http://www.hkrebs.dk/ 
> 
> 
> 
> 
> 
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L)
> mailing list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx 
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l 
> or email: MIDRANGE-L-request@xxxxxxxxxxxx 
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.


_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx 
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l 
or email: MIDRANGE-L-request@xxxxxxxxxxxx 
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.

THIS MESSAGE IS INTENDED ONLY FOR THE USE OF THE INDIVIDUAL OR ENTITY TO
WHICH IT IS ADDRESSED AND MAY CONTAIN INFORMATION THAT IS PRIVILEGED,
CONFIDENTIAL AND EXEMPT FROM DISCLOSURE UNDER APPLICABLE LAW.  If the reader
of this message is not the intended recipient, or the employee or agent
responsible for delivering the message to the intended recipient, you are
hereby notified that any dissemination, distribution, copying, downloading,
storing or forwarding of this communication is prohibited.  If you have
received this communication in error, please notify us immediately via email
and delete the message from your computer files and/or data base.  Thank
you.
_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.