× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



So, from the /400, do you connect to these printers via the remote outq
method or the PJL method?  I'm looking for the ability to connect via the
PJL method.

Dave

-----Original Message-----
From: Adam Lang [mailto:aalang@xxxxxxxxxxxxxxxxxxxx]
Sent: Thursday, March 20, 2003 10:30 AM
To: Midrange Systems Technical Discussion
Subject: Re: Laser printers


Ultimately, I have found HP laser printers to be the best and friendliest
printers for all workgroup level environments (they don't make any
production systems, you go to Canon for that, which ultimately both
companies use the same fab plants and parts).

I have Laserjet 5, laserjet 4100, 4200, Color laserjet 4500 and color
laserjet 4550 and they work without any issues with the AS/400 and PC
networks.  Plus, they are all based on the laserjet 4 engine, so your
drivers and settings for that will more than likely work fine for anything
newer.

Two weeks ago bought a HP Laserjet 4200N.  35 PPM.  Network ready (all HP
printers that have "N" after the model number ship with the network card).
$1500.

If you want under $1200, you aren't going to get anything over 19 PPM, but
HP has several of those models also.

Keep in mind, a Jetdirect card runs 200-300 dollars, so for network ready,
it adds some cast to the printer.

But I am very much HP proponent in regards to workgroup level printers.

----- Original Message -----
From: "Leland, David" <dleland@xxxxxxxxxx>
To: "'Midrange Systems Technical Discussion'" <midrange-l@xxxxxxxxxxxx>
Sent: Wednesday, March 19, 2003 11:24 AM
Subject: Laser printers


> I'd like to replace our old HP 4 laser printers with something faster and
> more input tray capacity.  I currently have them connected to our network
> with print servers from Troy, which works fine.  Can print to them from
the
> PC network and have created remote outqs on the /400, which allows me to
> print to them from the /400 also.
>
> So my question is, in the under $1,200 price range, what would be a good
> replacement laser printer (or combination laser printer & print server),
> keeping in mind that I need to print from both the network and the /400,
> using remote outq method (although PJL method would be even better).
Also,
> would like to have 500 sheet input tray capacity, if possible but not
> critical.
>
> I bought a Xerox Phaser 3400N (formerly Tektronics Phaser) and it has
> networking capabilities built-in but it does not play well with the /400.
> Xerox tech supported admitted it's networking capabilities are not very
> robust.
>
> Thanks,
> Dave

_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.