Re: 2761 Fax400 Card installed...printer file problems

[rob@xxxxxxxxx]

And probably even less help on the 2761 card.  Due to problems faxing they 
had me replace that card with the 2805.  Granted there are problems with 
the 2805, (that me and support are still ironing out) but you may want to 
consider it.  Especially since V5R2 is the last supported release for the 
2761, (as published on numerous IBM web pages - care to see the 
announcement letter?).

Rob Berendt
-- 
"They that can give up essential liberty to obtain a little temporary 
safety deserve neither liberty nor safety." 
Benjamin Franklin 




"William A.\(Tony\) Corbett" <corbett@xxxxxxxxxxxxxxx>
Sent by: midrange-l-bounces@xxxxxxxxxxxx
03/09/2003 01:28 PM
Please respond to Midrange Systems Technical Discussion
 
        To:     "MIDRANGE-L@xxxxxxxxx com" <MIDRANGE-L@xxxxxxxxxxxx>
        cc: 
        Fax to: 
        Subject:        2761 Fax400 Card installed...printer file problems


Hi,
Yesterday I installed and configured (for IBM Facsimile/400) a 2761 card,
replacing 4 2664 cards.  The install went OK, but my first test fax came 
out
with screwed-up spacing.  Looks like the spacing went to maybe 12LPI /
24CPI.  It's "scrunched", in other words.  I'm installing 5722SS1 option
43 - Additional Fonts now to see if this helps.  Anyone run into this (and
solved it)?  I've got to get this corrected before Monday morning, or face
the music of a LOT of howling users...and bosses.

I know about changing the *IPDS to *AFPDS.  Here's the OVRPRTF that I'm
using in this test case (a production program):
OVRPRTF FILE(OEPR243) PAGESIZE(68 132) LPI(8) CPI(15) OUTQ(FAX400Q))

I'll call Supportline shortly, but I've found that they're not much help 
on
application stuff.

Your help is appreciated.....

AS/Resources, Inc.
William A.(Tony) Corbett
IBM Certified Specialist - AS/400 Developer
http://www.asresources.com
corbett@xxxxxxxxxxxxxxx
770-587-4812 (office)
678-935-5006 (mobile)
fax:  404-663-4737



_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing 
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.