Re: Creating a PPP connection -V4R5 -- MIDRANGE-L

I tried the logging option.  Here are the results:

09:27:37.560 === Modem for PPP line PPP : USRobotics 56K V.90 Sportster.
09:27:37.581 === Attempting modem reset.
09:27:37.606 ==> AT&F1S0=0
09:27:37.660 === Reading modem response.
09:27:38.313 <== OK
09:27:38.419 === Attempting modem initialization.
09:27:38.420 ==> AT&D2&C1X4V1Q0S7=70&M4&H1&B1&K1&S1
09:27:38.427 === Reading modem response.
09:27:39.084 <== OK
09:27:39.098 === Attempting modem dial/answer.
09:27:39.099 ==> ATS0=2
09:27:39.767 <== OK
09:27:39.791 === Waiting for incoming call.
09:28:03.794 === Reading modem response.
09:28:04.308 <== RING
09:28:09.055 === Reading modem response.
09:28:09.570 <== RING
09:28:22.713 === Reading modem response.
09:28:23.228 <== CONNECT 28800/ARQ/V34/LAPM/V42BIS
09:28:23.433 === Incoming call received.
09:28:23.648 === Establishing point-to-point connection for profile PPP.
09:28:55.439 === NOTE: LCP sent MAX(10) Configure-Request
09:28:58.621 === Att

Any ideas?

Thanks

Mike


----- Original Message -----
From: "Patrick Townsend" <patownsend@patownsend.com>
To: "Midrange Systems Technical Discussion" <midrange-l@midrange.com>
Sent: Thursday, January 23, 2003 10:40 PM
Subject: Re: Creating a PPP connection -V4R5


> Mike,
>
> In OpsNav you can set on logging for the PPP connection. In the same
dialog
> where you start the PPP connection select the option for logging. You will
> then get a printed report with a lot of detail on the PPP negotiation
> phases. You might find something helpful in there.
>
> Patrick
>
>
> ----- Original Message -----
> From: "Mike Silvers" <msilvers@HBS-INC.COM>
> To: "Midrange-L list" <midrange-l@MIDRANGE.COM>
> Sent: Thursday, January 23, 2003 8:26 AM
> Subject: Creating a PPP connection -V4R5
>
>
> > All,
> >
> > I am trying to create a PPP connection using a US Robotics 5686e async
> > modem.  I have a validation list setup for the valid users, and I have
> CHAP
> > password validation.  I have an answer modem setup.  When I start the
PPP
> > connection, the line varies on and it waits for a connection.  When I
dial
> > in, the modem picks up and there is some communication between my PC and
> the
> > modem.  The PPP line status changes from waiting to answering.  Then the
> > connection drops.  The PPP connection goes back to the waiting state.
The
> > error I get is that the port has not connected (thanks to win2000 for
> their
> > descriptive errors).  The client side then drops.
> >
> > I am thinking that it might be in the modem initialization string -- but
I
> > don't know where to go with it.....
> >
> > Any ideas?
> >
> > Mike
> >
> >
> > =======================================
> > Mike Silvers
> > Senior Programmer/Analyst
> > IBM Certified Expert
> > Hainey Business Systems
> > Main Office:  (717) 718-9601 ext 237
> > Branch Office:  (410) 397-8739
> > http://www.hbs-inc.com
> > =======================================
> >
> >
> > _______________________________________________
> > This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list
> > To post a message email: MIDRANGE-L@midrange.com
> > To subscribe, unsubscribe, or change list options,
> > visit: http://lists.midrange.com/mailman/listinfo.cgi/midrange-l
> > or email: MIDRANGE-L-request@midrange.com
> > Before posting, please take a moment to review the archives
> > at http://archive.midrange.com/midrange-l.
> >
> >
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo.cgi/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>
>