Universal Connection Wizard (was 2771 & ECS)

Ok I found out how to do this.  Searching on IBM's web site revealed a
document called: "R510 Setting Up Point-to-Point Protocol ECS internal
Modem".  Document 23750200.  This gave me the step by step instructions.
BUT I still did not have the universal connection wizard.  Searching IBM's
web site for iSeries +"Universal Connection Wizard" revealed a document for
workarounds and Fixes for common.  Since it was not shown,  I basically had
to re-scan:

right click on connection and select proprieties.  Select the re-scan
option, close ops nav and re-open.  Too #$% simple.  But then I had an error
and had to load a PTF on the AS400 which was listed on the same FAQ
document.  SI04969 is the latest fix and SI02765 is defective and may have
to be removed.  I did not have either.

Well all is well and it seems to be working great now.  Thank you for all
your help, especially Kirk Goins.

Christopher K. Bipes      mailto:Chris.Bipes@Cross-Check.com
Operations & Network Mgr  mailto:Chris_Bipes@Yahoo.com
CrossCheck, Inc.          http://www.cross-check.com
6119 State Farm Drive     Phone: 707 586-0551 x 1102
Rohnert Park CA  94928    Fax: 707 586-1884