RE: RE: 3490 and V5R1

Is there a reason you would want to go to a density as low as 1600 ?

-----Original Message-----
From: Dave Snyder [mailto:dsnyder@blcnet.com]
Sent: Friday, September 27, 2002 9:26 AM
To: midrange-l@midrange.com
Subject: Re: RE: 3490 and V5R1


The init fails indicating that it is the wrong type of cartridge in the
device, but we have used these cartridges in the past:

Command used:
 INZTAP DEV(TAP03) NEWVOL(092202) CHECK(*NO) DENSITY(1600)

Message received:
Wrong type of cartridge in device TAP03.

If we use a density of 3200 it works.

Dave

>>> "Andy Nolen-Parkhouse" <aparkhouse@attbi.com> 9/27/02 9:19:57 AM >>>
Dave,

What are the symptoms?  Is the parameter no longer valid or does the
initialization fail in some other way?

Andy Nolen-Parkhouse

> On Behalf Of Dave Snyder
> Subject: 3490 and V5R1
>
> We moved to V5R1 this past weekend from V4R5. We have a 3490 tape
drive
> and can now not initialize tapes at 1600 BPI. Is this a change with
V5R1
> or something else?
> Any clues?
> Dave


_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.


_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.


**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.
**********************************************************************