RE: Operation Navigator Mgmt Central "Monitors"

["Haase, Justin C." <Justin.Haase@xxxxxxxxxxxx>]

System can get very confused re-living that hour in October.  IBM recommends
taking system entirely down and "skipping" that hour, if you will.  We just
make sure that performance tracking is down, mimix is down, all processes
are at very minimum, and then run a JOBSCDE with the CHGSYSVAL with
save(*NO) on both QHOUR and QUTCOFFSET to make sure it doesn't loop.

Don't forget to change your UTC offset.

October is the bad one - in the spring the time change is a piece of cake.

jch

-----Original Message-----
From: Dare [mailto:oludare@ix.netcom.com]
Sent: Monday, September 16, 2002 1:00 PM
To: midrange-l@midrange.com
Subject: Re: Operation Navigator Mgmt Central "Monitors"


I'm thinking about writing a code to make this process on my system
automatic.  Any downfall?

----- Original Message -----
From: "Haase, Justin C." <Justin.Haase@Kingland.com>
To: <midrange-l@midrange.com>
Sent: Monday, September 16, 2002 1:51 PM
Subject: RE: Operation Navigator Mgmt Central "Monitors"


> No.
>
> -----Original Message-----
> From: Dare [mailto:oludare@ix.netcom.com]
> Sent: Monday, September 16, 2002 12:52 PM
> To: midrange-l@midrange.com
> Subject: Re: Operation Navigator Mgmt Central "Monitors"
>
>
> Is "daylight Saving Time" automatic on the AS/400?
>
> ----- Original Message -----
> From: "Andy Nolen-Parkhouse" <aparkhouse@attbi.com>
> To: <midrange-l@midrange.com>
> Sent: Tuesday, September 10, 2002 3:17 PM
> Subject: RE: Operation Navigator Mgmt Central "Monitors"
>
>
> > Dare,
> >
> > Have you checked the system value QUTCOFFSET and compared it with the
> > time zone settings on your PC.  I suppose they may have put some code in
> > to account for the fact that a management PC could be in a different
> > time zone from the iSeries.
> >
> > If I read your email header correctly, you should be at a UTC of -04:00.
> > Are you in an eastern Canadian province?
> >
> > Regards,
> > Andy Nolen-Parkhouse
> >
> > > -----Original Message-----
> > > From: midrange-l-admin@midrange.com
> > [mailto:midrange-l-admin@midrange.com]
> > > On Behalf Of Dare
> > > Sent: Tuesday, September 10, 2002 11:49 AM
> > > To: MIDRANGE-L@midrange.com
> > > Subject: Operation Navigator Mgmt Central "Monitors"
> > >
> > > This is a multi-part message in MIME format.
> > > --
> > > [ Picked text/plain from multipart/alternative ]
> > > Hi guys,
> > >
> > > I use "Monitors" module under Management Central in Operation
> > Navigator.
> > >
> > > My question is the time is 4 hours back from current time. Is there a
> > way
> > > to synchronize the time on the system with the time in the graphs?
> > >
> > >
> > >
> > > Thanks,
> > >
> > > Dare
> > > --
> > >
> > > _______________________________________________
> > > This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> > > list
> > > To post a message email: MIDRANGE-L@midrange.com
> > > To subscribe, unsubscribe, or change list options,
> > > visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> > > or email: MIDRANGE-L-request@midrange.com
> > > Before posting, please take a moment to review the archives
> > > at http://archive.midrange.com/midrange-l.
> >
> > _______________________________________________
> > This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list
> > To post a message email: MIDRANGE-L@midrange.com
> > To subscribe, unsubscribe, or change list options,
> > visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> > or email: MIDRANGE-L-request@midrange.com
> > Before posting, please take a moment to review the archives
> > at http://archive.midrange.com/midrange-l.
> >
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>

_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.