|
>IIRC, >On the customer's system, change the local location name in the APPC device >description to be CUSTNAME instead of *NETATR...then reconfigure your end to >use CUSTNAME as the remote location name instead of S123456. > >Steve Landess Here's the command used to create the controller and device descriptions: (theirs) CRTCTLAPPC CTLD(SOLUTIONS) LINKTYPE(*SDLC) ONLINE(*NO) + SWITCHED(*YES) SHM(*NO) APPN(*NO) + MAXFRAME(521) RMTNETID(APPN) + RMTCPNAME(S999999) EXCHID(&EXCHID) + SWTLINLST(SOLUTIONS) INLCNN(*ANS) + CNNNBR(&NBR) ROLE(*NEG) STNADR(23) + AUTOCRTDEV(*ALL) TEXT(&CTLDSC) + CODE(*EBCDIC) PREDIALDLY(6) + REDIALDLY(120) DIALRTY(2) SWTDSC(*YES) + DSCTMR(30 30) POLLPTY(*NO) POLLLMT(0) + OUTLMT(*POLLLMT) CNNPOLLRTY(7) + NDMPOLLTMR(*CALC) CMNRCYLMT(2 5) CRTDEVAPPC DEVD(SOLUTIONS) RMTLOCNAME(S999999) ONLINE(*NO) + LCLLOCNAME(*NETATR) RMTNETID(APPN) + CTL(SOLUTIONS) MODE(*NETATR) + MSGQ(*LIBL/QSYSOPR) APPN(*NO) SNGSSN(*NO) + SECURELOC(*NO) TEXT('Solutions pass-thru') LOCADR(00) (ours) CRTCTLAPPC CTLD(CUSTNAME) LINKTYPE(*SDLC) ONLINE(*NO) + SWITCHED(*YES) SHM(*NO) APPN(*NO) + MAXFRAME(521) RMTNETID(APPN) + RMTCPNAME(S123456) EXCHID(&EXCHID) + INLCNN(*DIAL) DIALINIT(*IMMED) + CNNNBR(&NBR) ROLE(*NEG) STNADR(23) + AUTOCRTDEV(*ALL) TEXT(&CTLDSC) + CODE(*EBCDIC) PREDIALDLY(6) + REDIALDLY(120) DIALRTY(2) SWTDSC(*YES) + DSCTMR(30 30) POLLPTY(*NO) POLLLMT(0) + OUTLMT(*POLLLMT) CNNPOLLRTY(7) + NDMPOLLTMR(*CALC) CMNRCYLMT(2 5) CRTDEVAPPC DEVD(CUSTNAME) RMTLOCNAME(S123456) ONLINE(*NO) + LCLLOCNAME(*NETATR) RMTNETID(APPN) + CTL(CUSTNAME) MODE(*NETATR) + MSGQ(*LIBL/QSYSOPR) APPN(*NO) SNGSSN(*NO) + SECURELOC(*NO) TEXT('Customer pass-thru') LOCADR(00) On their end, they need to change the LCLLOCNAME(*NETATR) to LCLLOCNAME(CUSTNAME), and the RMTLOCNAME(S999999) to RMTLOCNAME(SOLUTIONS) On our end, we need to change the LCLLOCNAME(*NETATR) to LCLLOCNAME(SOLUTIONS), and the RMTLOCNAME(S123456) to RMTLOCNAME(CUSTNAME) Correct? Do I need to make any changes to the RMTCPNAME parameters in the controller descriptions? Assuming that I make the LCLLOCNAME changes (above): Directory entries: Do I use the ADDDIRE USRID(*ANY CUSTNAME) SYSNAME(CUSTNAME) on our system? Do they use ADDDIRE USRID(*ANY SOLUTIONS) SYSNAME(SOLUTIONS) on their system? Distribution queue: Do I use ADDDSTQ DSTQ(CUSTNAME) RMTLOCNAME(CUSTNAME) LCLLOCNAME(SOLUTIONS)? Do they use ADDDSTQ DSTQ(SOLUTIONS) RMTLOCNAME(SOLUTIONS) LCLLOCNAME(CUSTNAME)? Distribution route: Do I use ADDDSTRTE SYSNAME(CUSTNAME) FAST(CUSTNAME) STATUS ....? Do they use ADDDSTRTE SYSNAME(SOLUTIONS) FAST(SOLUTIONS) STATUS .... ?
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.