RE: Urgent - AS400 Connectivity Problem

["Carl Galgano" <cgalgano2@xxxxxxxxxxxxxxxxx>]

On the Ethernet lind check the DUPLEX parameter.  I have seen the 400
have problems negotiating with some switches.  You may want to try to
change the parameter to *HALF.
cjg

Carl J. Galgano
EDI Consulting Services, Inc.
550 Kennesaw Avenue, Suite 800
Marietta, GA  30060
(770) 422-2995 - voice
(419) 730-8212 - fax
mailto:cgalgano@ediconsulting.com
http://www.ediconsulting.com
AS400 EDI, Networking, E-Commerce and Communications Consulting and
Implementation
http://www.icecreamovernight.com
Premium Ice Cream Brands shipped Overnight
FREE AS/400 Timesharing Service -
http://www.ediconsulting.com/timeshare.html
"You ain't gonna learn what you don't want to know" - rw


-----Original Message-----
From: midrange-l-admin@midrange.com
[mailto:midrange-l-admin@midrange.com] On Behalf Of
KarthikeyanS@lincsoftware.soft.net
Sent: Friday, April 19, 2002 10:14 AM
To: midrange-l@midrange.com
Subject: Urgent - AS400 Connectivity Problem


Hi All,

I have a problem with my as400 connectivity to my emulator software.
I'm
trying to connect a 150 model as/400 server (V4R2) system to a emulator
software here. The problem starts when i ping my as400.  My PC on the
network is getting the  reply for some time and after some time it gets
a request time out message. So, what happens is even if i connect to the
as400 through a emulator software, it connects in the beginning and gets
disconnected after some time (may be in 2 or 3 minutes after
connecting). But, If I connect the as400 to a separate hub(where no
other pc's are
connected) and connect my pc to that hub, there is no request time out
message and I'm able to work in the emulator software without getting
disconnected.  I think with this i can come to a conclusion that my
as400's
ethernet card is working fine.   This as400 is connected to a LAN port.
I
have also tried connecting the as400 directly to the hub or switch, but
face the same problem.  There are other as400 systems in the network
(170 models V4R4) which are working fine.

What could be the exact problem and where could it be?? Please help me
to solve this never ending problem ASAP.

Rgds,
Karthik

_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@midrange.com To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.