RE: Disk replacement for DUMMIES

["Carley, Neil" <neil.carley@xxxxxxxxx>]

Carl,

For RAID-5 you need a minimum of 4 disk units in each set, the feature no.
can be different but the capacity of the disk units must be the same.

Neil

-----Original Message-----
From: Carl Galgano [mailto:cgalgano2@ediconsulting.com]
Sent: 18 April 2002 14:36
To: midrange-l@midrange.com
Subject: RE: Disk replacement for DUMMIES


Ok, one more question.... Again.
On the box w/no RAID, it has 2 6606 and 2 6607 drives.  Do all the
drives in the RAID pool need to be the same model/type/capacity?
cjg

Carl J. Galgano
EDI Consulting Services, Inc.
550 Kennesaw Avenue, Suite 800
Marietta, GA  30060
(770) 422-2995 - voice
(419) 730-8212 - fax
mailto:cgalgano@ediconsulting.com
http://www.ediconsulting.com
AS400 EDI, Networking, E-Commerce and Communications Consulting and
Implementation
http://www.icecreamovernight.com
Premium Ice Cream Brands shipped Overnight
FREE AS/400 Timesharing Service -
http://www.ediconsulting.com/timeshare.html
"You ain't gonna learn what you don't want to know" - rw


-----Original Message-----
From: midrange-l-admin@midrange.com
[mailto:midrange-l-admin@midrange.com] On Behalf Of Carl Galgano
Sent: Thursday, April 18, 2002 9:32 AM
To: midrange-l@midrange.com
Subject: RE: Disk replacement for DUMMIES


One other question about RAID5.  I have another AS400 here that has 4
drives in it, but there is no RAID5 controller in the box.  The machine
is at about 30% used as far as DASD goes.  I have a RAID5 card for it.
Can I just put the card in, and then set up the raid pool in SST/DST, or
do I need to reload the system? cjg

Carl J. Galgano
EDI Consulting Services, Inc.
550 Kennesaw Avenue, Suite 800
Marietta, GA  30060
(770) 422-2995 - voice
(419) 730-8212 - fax
mailto:cgalgano@ediconsulting.com
http://www.ediconsulting.com
AS400 EDI, Networking, E-Commerce and Communications Consulting and
Implementation http://www.icecreamovernight.com Premium Ice Cream Brands
shipped Overnight FREE AS/400 Timesharing Service -
http://www.ediconsulting.com/timeshare.html
"You ain't gonna learn what you don't want to know" - rw


-----Original Message-----
From: midrange-l-admin@midrange.com
[mailto:midrange-l-admin@midrange.com] On Behalf Of Philipp Rusch
Sent: Wednesday, April 17, 2002 5:56 PM
To: midrange-l@midrange.com
Subject: Re: Disk replacement for DUMMIES


Hello Carl,
first, don't worry about the data on the failed drive, it will be
rebuilt from the redundant information of the other drives in the RAID
set. The only thing you must manually take care of is the failed drives
"hardware object" should be removed from the configuration, otherwise it
will stay there in the config info for ever ... sounds more complicated
than it is in reality. OK, step by step: you got a new drive, you
planned a downtime, you power down your system. Identify the failed
drive, take out the old drive and put in the new one, then power up
again in manual mode (IPL from  B M). Go to DST and sign on as QSECOFR,
not 11111111 and not 22222222. Go to the "work with disk units" menus,
"work with disk configuration" and then "work with device parity
protection" (this is RAID-5 in AS/400 terms) There you start your RAID
protection again. If this has been completed, you add the new unit to
your ASP and look at the resulting config and now you got to look for a
drive missing from config (the old one). Remove it. Then exit DST and go
on with the IPL. System should be running normal as before. Switch IPL
mode back to normal and THAT 'S IT !

HTH, regards from germany, Philipp Rusch


_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@midrange.com To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.

_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.