Re: SRC code A1934505

Carl,

Looks like there is a problem with the load source drive.   I dont know for
sure, but you might be able to disconnect the scsi cable to the load source
drive. ( Of course you need to know which is the load source drive, and I
dont know <g> ) .  The load source may just be the first drive in the scsi
chain of drives.  The ipl D may just be hard coded to write to the load
source ( first ) drive.  If your first drive is failing, then the ipl D will
fail.

Steve Richter
AutoCoder, LLC



----- Original Message -----
From: "Carl Galgano" <cgalgano2@ediconsulting.com>
To: <midrange-l@midrange.com>
Sent: Sunday, April 14, 2002 7:18 AM
Subject: RE: SRC code A1934505


> OK thanks.  I am not authorized to look at the link you reference, but
> thanks for the info.
> cjg
>
> Carl J. Galgano
> EDI Consulting Services, Inc.
> 550 Kennesaw Avenue, Suite 800
> Marietta, GA  30060
> (770) 422-2995 - voice
> (419) 730-8212 - fax
> mailto:cgalgano@ediconsulting.com
> http://www.ediconsulting.com
> AS400 EDI, Networking, E-Commerce and Communications Consulting and
> Implementation
> http://www.icecreamovernight.com
> Premium Ice Cream Brands shipped Overnight
> FREE AS/400 Timesharing Service -
> http://www.ediconsulting.com/timeshare.html
> "You ain't gonna learn what you don't want to know" - rw
>
>
> -----Original Message-----
> From: midrange-l-admin@midrange.com
> [mailto:midrange-l-admin@midrange.com] On Behalf Of Fritz Hayes
> Sent: Saturday, April 13, 2002 11:13 PM
> To: midrange-l@midrange.com
> Subject: RE: SRC code A1934505
>
>
> >From the Problem Analysis PDF referenced at the following link:
>
> http://publib.boulder.ibm.com/pubs/html/as400/v4r5/ic2924/v4r5hwpdf/pdf/
> model7xx.htm
>
> A1XX - 4505 Problem with load source device media
>
> Note: If the system has undergone a recent hardware upgrade, please
> check the installation procedures for required corresponding software
> upgrades.
>
> If the failing system is going through an IMPI to PowerPC AS upgrade and
> the original IMPI load source disk unit is still associated with the
> MFIOP, do the following:
>
> Change the address of the original IMPI load source disk unit so that
>
> 1) the DSA is different than used on IMPI and
>
> 2) the PowerPC AS load source has a lower DSA than the original IMPI
> load source.
>
> Failing Item:  FI00072
>
>
> Best Regards
>
> Fritz Hayes
> Atwater Associates
> 503-636-5914
>
> <snip>
> | Subject: SRC code A1934505
> |
> | Here is the situation.
> | AS/400, model 600-9406, running V4R2.
> | Kept receiving critical messages that a DASD (6607) was about to fail.
>
> | So I tried to do a save to get the best back up possible.  The machine
>
> | was running fine, except for the impending DASD failure message.  So,
> I
> | started an option 21 save.  That is when the trouble started.  While
> | doing the option 21 the machine hung with a B1000255 SRC.  (Disk
> failure
> | I think).  So I powered it down to see if I could do a manual IPL, and
> I
> | can not.  Now no matter what IPL I try (A, B or D Manual or an A or B
> | normal), the machine dies with an A1934505.  Anyone have any ideas?
> The
> | manual I have does not list this SRC code.
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list To post a message email: MIDRANGE-L@midrange.com To subscribe,
> unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>
>