Re: Spool sendng from AS/400 to S/390

["Mike Shaw" <mhshaw@xxxxxxxxxxxxxxxx>]

Scotty,

I solved this problem with a package called XCOM.  If I am not mistaken,
it's a Computer Associates product.  The S/390 was a VM/VSE machine with no
TCP/IP, only SNA between it and the AS/400's.  It's a fairly reliable
package for moving SPLF's to/from AS/400 and S/390 as well as data files.
Just remember it resides on both the AS/400 as well as the S/390.

I cannot tell you much about pricing in that I did not have to buy the
package.  It was already on the S/390 and AS/400's for file transfer.

<HTH>

Regards,

Mike Shaw

----- Original Message -----
From: "Scotty Muir" <smuir@TriangleGroup.com>
To: <midrange-l@midrange.com>
Sent: Tuesday, March 12, 2002 8:10 AM
Subject: Re: Spool sendng from AS/400 to S/390


> Gokham,
>
> I see on my last post the Word document got deleted somewhere. Following
is
> it cut and pasted into the email.
>
> The LPR command that works for everything except when overprinting a line
a
> second time to have it appear BOLD. With these otions it prints on two
> separate lines. The printer appears to be doing a LF and CR instead of
just
> a CR.
>
>
> LPR RMTSYS(ES9000) PRTQ(FAST) FILE(PRINTER) TRANSFORM(*YES)
> JOB(031464/*N/AP0105) MFRTYPMDL(QSYS/QWPDEFAULT) DESTOPT(>f=)
>
> The options to use on the LPR command are as follows:
> PRTQ   FAST
> DESTTYP  *OTHER
> TRANSFORM *YES
> MFRTYPMDL *WSCST
> WSCST  QSYS/QWPDEFAULT
> DESTOPT  >f=
>
>
>
>
> _____________________________
> Scotty Muir
> Sr. Systems Programmer
> Triangle Suspension Systems, Inc.
> DuBois, Pa.
> smuir@trianglegroup.com
>
>
> ----- Original Message -----
> From: "Scotty Muir" <smuir@TriangleGroup.com>
> To: <midrange-l@midrange.com>
> Sent: Tuesday, March 12, 2002 11:05 AM
> Subject: Re: Spool sendng from AS/400 to S/390
>
>
> > This is a multi-part message in MIME format.
> > --
> > Gokham,
> >
> > I played very little, but have gotten AS/400 print output to our VSE/ESA
> > system printer. The only problem I was unable to solve was printing any
> > advanced functions, like printing a line twice to have it appear bold on
> the
> > AS/400 printed twice on the mainframe printer.
> > This was using the LPR function of TCP/IP on both systems to get this
far.
> > Attached is a Word document that shows the LPR command I used on the
> AS/400.
> >
> > I realize this is probably not of much help, but hopefully at least a
> > little.
> >
> > Scotty
> >
> > _____________________________
> > Scotty Muir
> > Sr. Systems Programmer
> > Triangle Suspension Systems, Inc.
> > DuBois, Pa.
> > smuir@trianglegroup.com
> >
> >
> > ----- Original Message -----
> > From: "Gokhan Yildirim (Garanti Teknoloji)" <GokhanY@garanti.com.tr>
> > To: <midrange-l@midrange.com>
> > Sent: Tuesday, March 12, 2002 10:33 AM
> > Subject: Spool sendng from AS/400 to S/390
> >
> >
> > > This message is in MIME format. Since your mail reader does not
> understand
> > > this format, some or all of this message may not be legible.
> > > --
> > > --
> > > [ Picked text/plain from multipart/alternative ]
> > > Hello,
> > > Is there anyone working with S/390 and AS/400? I would like to print
> > AS/400
> > > spools from S/390 JES2 system printer.
> > >
> > > Any and all input is greatly appreciated. Thanks in advance.
> > >
> > > Gokhan YILDIRIM
> > > --
> > >
> > > _______________________________________________
> > > This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> > list
> > > To post a message email: MIDRANGE-L@midrange.com
> > > To subscribe, unsubscribe, or change list options,
> > > visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> > > or email: MIDRANGE-L-request@midrange.com
> > > Before posting, please take a moment to review the archives
> > > at http://archive.midrange.com/midrange-l.
> > >
> > >
> > --
> > [ AS400LPR.doc of type application/msword deleted ]
> > --
> >
> > _______________________________________________
> > This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list
> > To post a message email: MIDRANGE-L@midrange.com
> > To subscribe, unsubscribe, or change list options,
> > visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> > or email: MIDRANGE-L-request@midrange.com
> > Before posting, please take a moment to review the archives
> > at http://archive.midrange.com/midrange-l.
> >
> >
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>
>