RE: model 170 problems

["Norbut, Jim" <Jim.Norbut@xxxxxxxxxxxxxxx>]

Either that or have the person there use the LED's up arrow to get to "3"
and then the middle button between the arrows.
"3" means to IPL the machine.

But it's easier to just hit the big white button.
It will take apx. 5 seconds for it to turn on...so don't worry if it doesn't
happen right away.


Jim Norbut
Systems Administrator
Grubb & Ellis Company
Phone   (847) 753-7620
Fax     (847) 753-9854

 -----Original Message-----
From:   Smith, Mike [mailto:Mike_Smith@RGCResources.com]
Sent:   Monday, March 04, 2002 2:38 PM
To:     'midrange-l@midrange.com'
Subject:        RE: model 170 problems

probably dumb question, but i haven't touched the hardward side of things
since the s/38 days.
given my current state. If i want to try to IPL.  is all i have to do is
push the white button?
-----Original Message-----
From: Norbut, Jim [mailto:Jim.Norbut@Grubb-Ellis.com]
Sent: Monday, March 04, 2002 3:34 PM
To: 'midrange-l@midrange.com'
Subject: RE: model 170 problems


Can't connect via TCP/IP either ?

Jim Norbut
Systems Administrator
Grubb & Ellis Company
Phone   (847) 753-7620
Fax     (847) 753-9854

 -----Original Message-----
From:   Smith, Mike [mailto:Mike_Smith@RGCResources.com]
Sent:   Monday, March 04, 2002 2:27 PM
To:     'midrange-l@midrange.com'
Subject:        RE: model 170 problems

no, can't connect to it.
there is no signon screen at the console.


-----Original Message-----
From: Norbut, Jim [mailto:Jim.Norbut@Grubb-Ellis.com]
Sent: Monday, March 04, 2002 3:27 PM
To: 'midrange-l@midrange.com'
Subject: RE: model 170 problems


01 is the Control Panel code
B is for "B" side IPL Mode
N is for "Normal" IPL

This is all normal....nothing wrong w/ this display on the LED.
Connect to it if possible....or can't you ?

Jim Norbut
Systems Administrator
Grubb & Ellis Company
Phone   (847) 753-7620
Fax     (847) 753-9854

 -----Original Message-----
From:   Smith, Mike [mailto:Mike_Smith@RGCResources.com]
Sent:   Monday, March 04, 2002 2:18 PM
To:     'midrange-l@midrange.com'
Subject:        model 170 problems

Hoping someone can provide a little help here, realizing i'm going to be
probably a little thin on information to provide.

I have a remote 170.  We don't have anyone onsite to provide any assistance.
I did have someone go look at the machine and the LED shows  '01    B N'
There doesn't appear to be any processor activity.'

Can someone tell me what this code is or where i can find out what this code
represents.
ALso, any thing else i can check to determine what the problem is?

any help is greatly appreciated.

Thanks

mike
_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.
_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.
_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.
_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.
_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.