Re: HTTPS

["Brad Stone" <brad@xxxxxxxxxxxx>]

I have it working.  There's a lot of crap that goes on in
there.  If you're not getting any response, I'd say you're
doing something wrong with the write, or something with your
socket descriptors.

Do you have non-SSL working?  The request string should look
the same for SSL vs. non-SSL.  You just need to use a
different port.

Do you have a site I can hit with my GETURI utility to make
sure it's not the server?  Mail me privately if so...

Brad
www.bvstools.com

On Tue, 26 Feb 2002 10:27:30 -0800
 Chris Bipes <chris.bipes@cross-check.com> wrote:
> Has anyone done HTTPS Get request from RPGLE?  I am
> connecting and
> handshaking all of the SSL stuff using the V4R4 SSL APIs.
> The SSL_WRITE
> looks good.  I am not getting any response on the read.
> Is there more to a
> GET request from a browser than the write / read?
>
>
> TIA,
>
> Christopher K. Bipes    mailto:ChrisB@Cross-Check.com
> Operations & Network Mgr  mailto:Chris_Bipes@Yahoo.com
> CrossCheck, Inc.                http://www.cross-check.com
> 6119 State Farm Drive   Phone: 707 586-0551 x 1102
> Rohnert Park CA  94928          Fax: 707 586-1884
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion
> (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the
> archives
> at http://archive.midrange.com/midrange-l.
>

Bradley V. Stone
BVS.Tools
www.bvstools.com