Ok, I am trying to use the internal modem for a dial out to a customer site but getting the following error when trying to vary the line on: --00002014: Conflict between IOA type and physical interface specified in line description. Here is my line description: RSRCNAME CMN01 ONLINE *NO VRYWAIT *NOWAIT NRZI *YES MAXCTL 1 CLOCK *MODEM LINESPEED 9600 MODEM *NORMAL MODEMRATE *FULL SWTCNN *BOTH AUTOANS *YES AUTODIAL *YES DIALCMD *V25BIS CALLNBR *NONE STNADR *SAME CNNPOLLRTY 7 MAXFRAME 521 THRESHOLD *OFF DUPLEX *FULL MODULUS 8 MAXOUT 7 INACTTMR *SAME POLLRSPDLY *SAME NPRDRCVTMR 4200 IDLTMR 30 CNNPOLLTMR 30 POLLPAUSE 0 FRAMERTY 7 DSRDRPTMR 6 AUTOANSTYP *DTR CTSTMR 25 RMTANSTMR 60 LINKSPEED 9600 COSTCNN 128 COSTBYTE 128 SECURITY *NONSECURE PRPDLY *TELEPHONE USRDFN1 128 USRDFN2 128 USRDFN3 128 CMNRCYLMT 2 5 Not sure where else to look or how to proceed. Dave >>> "Andy Nolen-Parkhouse" <firstname.lastname@example.org> 1/4/02 12:28:46 PM >>> Dave, The 2771 card is the one. The telephone line is connected to an internal V.90 56K Asynchronous MODEM. This MODEM could be used for normal asynchronous PPP connections, including customer dial-in. It could not be used for traditional AS/400 synchronous tasks. The card has a feature code of #9771 and a CCIN number (reported in hardware resources) of 2771, so they are the same thing and refer to the entire card and both ports. To set up PPP connections you would use Operations Navigator to configure the connection, referencing a hardware resource of CMN02. Regards, Andy Nolen-Parkhouse > I am on a model 820 running v4r5. We have a 2771 card that I have been > told has two communication lines possible. One is your "typical" modem > cable that we attached to an external modem we use for external customer > dial in. The other is a telephone type of line coming from the same card. > I have been told this is a 9771. Is anyone familiar with this? From what I > can find out this is a line that we could connect to a WAN. Does anyone > know if I can use this as a separate phone line for external customers to > dial into, and if so, how, or what all can I do with this line? > > This is what my hardware communication resources looks like: > CMB01 284C Operational Combined function IOP > LIN01 2771 Operational Comm Adapter > CMN01 2771 Operational Comm Port > CMN02 2771 Operational V.24 Port _______________________________________________ This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@midrange.com To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l or email: MIDRANGE-Lemail@example.com Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.
As an Amazon Associate we earn from qualifying purchases.
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.