-- I am logged in with 22222222 and I tried with QSECOFR. I can get to 'Work with Disk Units' but I dont have the option 'Work with Disk Configuration' >>> firstname.lastname@example.org 12/16/01 02:34PM >>> Chris, I'm assuming that you're booting from CD and coming up to the selections below: 'IPL or Install the System' Select 'Use Dedicated Service Tools' 'Use Dedicated Service Tools' Select 'Work with Disk Units' 'Work with Disk Units' Select 'Work with Disk Configuration' 'Work with Disk Configuration' Select 'Work with Device Parity Protection' and so on... If you can't find or display these options, there is a good chance that you are logging into DST with insufficient authority. Are you logging on as QSECOFR? If you're logging on as QSECOFR and still cannot see the options, how far do you get? What do you see? Regards, Andy Nolen-Parkhouse > I have a 270 with four drives in it, and I want to remove all four of > those drives and replace them with 6 new drives. > > After I take the old out and put the new drives back in I can boot into > DST, but I don't get any of the options to configure the disks. > > Any help would be greatly appreciated! > > Chris _______________________________________________ This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@midrange.com To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l or email: MIDRANGE-Lemail@example.com Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.
As an Amazon Associate we earn from qualifying purchases.
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.