Depending on what you need in CA I know you that Synapse still supports SNA based display, printer, and file transfer which uses the NetSoft Router ver 3.12 as patched by Service Pack 2. This would typically be over twinax -- either ISA or PCI cards. Jerry Jerome Draper, Trilobyte Software Systems, since 1976 Network and Connectivity Specialist -- Mac's, LAN's, PC's, Windows, Linux, Sun, and AS/400 Representing Synapse, CLI, Nlynx, Perle, Lucent, 3Com and Others ..... http://www.trilosoft.com - (415) 457-3431 - (415) 258-1658fax - email@example.com > <snip> > > Will Client Access V3R2 Still function with OS/400 V5R1? > <snip> > > Chris, > > I have not tried it, but I have spoken to SupportNet technical staff about > it. Here is what I learned: > > 1) IBM doesn't support it, so if you try it you are on your own. > 2) Given the specific circumstances, some of their clients had gotten it to > work partially and others had given up. No client (that the individual I > was speaking with was aware of at least) had accomplished what could be > considered a stable environment. > > Based on this we decided that for ourselves we would switch to CA Express. > And this is what we are also strongle recommending to our clients. > > Chuck > > _______________________________________________ > This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list > To post a message email: MIDRANGE-L@midrange.com > To subscribe, unsubscribe, or change list options, > visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l > or email: MIDRANGE-Lfirstname.lastname@example.org > Before posting, please take a moment to review the archives > at http://archive.midrange.com/midrange-l. > >
As an Amazon Associate we earn from qualifying purchases.
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.