Re: Integrated server NT 4.0 and Raptor Firewall

[bdietz@xxxxxx]

One thing to llook for is the IP address of the internal token-ring
interface.  This interface is how the 400 "talks" to the NT system.

>From the NT DOS prompt try IPCONFIG /ALL
and it can be seen from the as400 also.  NETSTAT option 1.


-------------------------
 Bryan Dietz
3X Corporation






                    "Richard Bryant"
                    <rbryant@quipp.com>       To:     "Midrange-L \(E-mail\)" 
<midrange-l@midrange.com>
                    Sent by:                  cc:
                    midrange-l-admin@mi       Subject:     Integrated server NT 
4.0 and Raptor Firewall
                    drange.com


                    11/27/2001 08:38 AM
                    Please respond to
                    midrange-l






I have been receiving the following error:

Nov 27 07:37:48.131  notifyd: 457 message repeated 11 times (Arp Error: A
host with address 192.168.2.2 (MAC 45:00:00:00:02:00) is active on
interface
192.168.2.2 -- this address is assigned to the firewall)

I have talked with Symantec and have been told the Axent firewall does not
support virtual IP addresses nor the configuration of AS/400 and integrated
server.

Does anyone here have this type of configuration and are you receiving this
message also?

Does not seem to affect anything, only that the firewall sends me 50
messages a day and makes it impossible to have Firewall errors routed to my
cell phone.


Richard Bryant
MIS Coordinator
Quipp Systems Inc.
rbryant@quipp.com

__