Re: CA Express and multiple 5250 sessions

[afvaiv <afvaiv@xxxxxxxxxx>]

Some more feedback on same problem, just to see if someone has more ideas...
As I mentioned before, second session will not connect until first session is
closed...
BUT surprisingly, if when configuring the new session you write the host's IP
address instead of its SystemName, then everything works ! So, now I'm able to
have as many sessions as I want, just as far as the AS/400 is refered to by its
IP address!
Sounds a little stupid, but it works, whereas with system names, just one
session will connect at any given time... but this is only for some of the
PCs... The rest work fine with system names for as many sessions as wanted...

Will keep informing if any thing new comes up. Still would like some ideas if
anybody gets any! Thanks.

"Boling, David E." escribió:

> Make sure you have Administrator rights to the pc.
>
> David Boling (bolingde@co.rowan.nc.us)
> Information Systems Director
> Rowan County Information Systems Department
>
> -----Original Message-----
> From: afvaiv [mailto:afvaiv@wanadoo.es]
> Sent: Thursday, November 01, 2001 5:48 PM
> To: MIDRANGE-L
> Subject: CA Express and multiple 5250 sessions
>
> Hi, I'm having problems with CAExpress V4R5. Have many PC's installed
> same version, same ServicePack (latest). OS/400 also V4R5 and latest Cum
> level.
>
> Some of them have no problem to configure two or more 5250 emulation
> sessions...
> Some others, just CANNOT.
> Well you can always try to configure a second session, but when it comes
> to try to connect, you get an error about "licenses in this PC"...
> If you "disconnect" the first session, then second session will connect
> ok without changes, but then the first session will get same error if
> you try to reconnect it with the second one still active.
> The error in each case was CWBLM0011, saying something about licenses
> "in this PC"... but at the same time other PC's can have 2 or 3
> simultaneous sessions...
> Digging in a little deeper, in CAExpress log, I see there's a previous
> message (CWBSY1003  ? sorry, I don't have on hand) that just mentions
> "invalid SystemName" but that is NOT probably the real reason, since
> just disconnecting the other (first) session then the second one
> connects without changes... No problem then.
>
> Searching thru the archives I only found Rob Berendt's thread about
> "Upgrade to V5R1 issues:" but here he just mentioned "Have all PC's
> reboot.  Some people just log off.  Failure to reboot may result in PC's
> receiving a CWBLM0011 error when trying to start more than one 5250
> session." as something maybe related to V5R1, and rebooting, and in our
> case has nothing to do with V5R1 (we are at V4R5), nor with rebooting...
> (we've tried all different types of combinations, reboot  PC, reboot
> AS/400...) and it's just some of the PC's (always the same ones) that
> suffer this disease, but not the others!
>
> Any ideas?
> TIA, Antonio
> -------------------------
> Antonio Fernandez-Vicenti
> afvaiv@wanadoo.es
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.

--
-------------------------
Antonio Fernandez-Vicenti
afvaiv@wanadoo.es