IP Printer on AS400

Sorry People..  Had to Resend this...  Tab problems..

Hi,

I have a number of HP 2100 network laser printers as IP printers set up on our 
AS400 using the following setup parameters...

Device description . . . . . . . ;PRINTIP1
Option . . . . . . . . . . . . . . :*BASIC
Category of device . . . . . . . . :*PRT

Device class . . . . . . . . . . . :*LAN
Device type  . . . . . . . . . . . :3812
Device model . . . . . . . . . . . :1
LAN attachment . . . . . . . . . . :*IP
Port number  . . . . . . . . . . . :9100
Physical attachment  . . . . . . . :*DIRECT
Online at IPL  . . . . . . . . . . :*YES
Font:
Identifier . . . . . . . . . . . :010
Point size . . . . . . . . . . . :10.0
Form feed  . . . . . . . . . . . . :*AUTOCUT
Separator drawer . . . . . . . . . :*FILE
Separator program  . . . . . . . . :*NONE
Printer error message  . . . . . . :*INFO
Message queue  . . . . . . . . . . :*CTLD
Current message queue  . . . . . . :QSYSOPR
Library  . . . . . . . . . . . . :QSYS
Activation timer . . . . . . . . . :30
Inactivity timer . . . . . . . . . :*SEC30
Line speed . . . . . . . . . . . . :19200
Word length  . . . . . . . . . . . :8
Type of parity . . . . . . . . . . :*NONE
Stop bits  . . . . . . . . . . . . :1
Host print transform . . . . . . . :*YES
Manufacturer type and model  . . . :*HP5
Paper source 1 . . . . . . . . . . :*LETTER
Paper source 2 . . . . . . . . . . :*LETTER
Envelope source  . . . . . . . . . :*NUMBER10
ASCII code page 899 support  . . . :*NO
Image configuration  . . . . . . . : *IMGA03
Character identifier . . . . . . . :*SYSVAL
Remote location:
Name or address  . . . . . . . . :10.0.0.11

The problem that I have is that I have recently configured a HP2200 network 
laser printer using the same configuration and I am having problems with how 
the pages are being printed.  The output is onto a pre printed form which 
should start printing on about the 4th line of the page but no matter what 
settings I change the output is being printed onto the 1st line of the page 
even if the print program is changed.  When I hang the printer off of a pc and 
create a session in client access for the printer and then print to it the 
output is correct.  Is there something that I am missing here about IP printer 
setep.  We are on V4R5...

Tia

Keith