Internet PTFs

[Jeff Bull <Jeff.Bull@xxxxxxxxxxxxxxx>]

Hi all,
        I opened a thread two or three weeks ago on this subject, I made a
little progress at the time, but never actually got it going, however ...

        I have been convinced for a while now that despite the test of
SOCKS saying 'Your socks configuration works', in practice it did not.

        A colleague suggested to me this morning that I could try a normal
dial-up connection to an ISP - bypassing our company firewall.

        I use a laptop PC with an ethernet network card and an internal
modem, I use MS Win98.
        a)      I logged onto the network in the usual way, giving me telnet
access to the AS/400.
        b)      I created a new connection in 'Dial-up Networking' for the
ISP (I used a personal account for the test).
        c)      I connected to the ISP using the new connection.
        d)      I temporarily disconnected my network connection.
        e)      I fired up IEXPLORE and logged onto
http://www.as400service.ibm.com
        f)      I reconnected my network cable
        g)      I now had an internet connection via my modem, and a telnet
connection available to my AS/400.
        h)      I now went through the usual links and procedures, and blow
me down - it worked.

        The IBM procedures for the Socks config/setup mention two IP-ports
9600 and 9601, but when I got the iPTF system working I checked with
Netstat, Work with TCP connection status, and it didn't touch these ports.
What is worse, I shut it down and did another test, and it used different
ports again!  I don't claim to understand all about this, but it certainly
does not seem to work as published.

I hope my experiences can help some of you.

Kind Regards,

Jeff Bull
AS/400 Software Support Consultant
IBM Certified AS/400 System Administrator

Mailto:jeff.bull@itm-group.co.uk
Website: http://www.itm-group.co.uk

ITM Group, 7 Skyport Drive, Harmondsworth, Middlesex, UB7 0LB, United
Kingdom
SwBd: +44 [0208] 476 2000 ; Fax: +44 [0208] 476 2111 ; Mbl: +44 [0786] 750
4961




DISCLAIMER

Any opinions expressed in this email are those of the
individual and not necessarily the Company. This email
and any files transmitted with it, including replies and
forwarded copies (which may contain alterations)
subsequently transmitted from the Company, are
confidential and solely for the use of the intended recipient. If you are not 
the intended recipient or the
person responsible for delivering to the intended recipient,
be advised that you have received this email in error and
 that any use is strictly prohibited.

If you have received this email in error please notify the IT
manager by telephone on +44 (0)208 4762000 or via
email to Administrator@itm-group.co.uk, including a copy
of this message. Please then delete this email and
destroy any copies of it.

_____________________________________________________________________
This message has been checked for all known viruses by Star Internet
delivered through the MessageLabs Virus Scanning Service. For further
information visit http://www.star.net.uk/stats.asp or alternatively call
Star Internet for details on the Virus Scanning Service.