RE: Private Authority

Chuck,

We use goup profiles. Yes, every user has the authority which is needed.
Approx 200 profiles.
Chris

-----Original Message-----
From: midrange-l-admin@midrange.com
[mailto:midrange-l-admin@midrange.com] On Behalf Of Chuck Morehead
Sent: 06 September 2001 03:33
To: midrange-l@midrange.com
Subject: Re: Private Authority


Chris,

What is your standard method for securing objects?  I.e., do you utilize
group profiles or authorization lists?  Is every user simply granted
authority to what they need?  Out of curiosity, how many user profiles
are there on your system?

Chuck

----- Original Message -----
From: "Jnb ZI, Christophe Wenk" <christophe.wenk@kuehne-nagel.com>
To: <midrange-l@midrange.com>
Sent: Thursday, September 06, 2001 8:12 AM
Subject: RE: Private Authority


> Andy,
>
> It says following:
>
>  Cause . . . . . :   The guideline was first exceeded in the interval
>
>  ending 06.09.01 13:54:03. The maximum rate was 216 checks per second
> and  occurred in the interval ending 06.09.01 13:54:03.  At the
> maximum rate,
>  these checks may have used as much as 6% of the processing unit. The
>
>  guideline was exceeded in 1 out of 1 intervals.
>
>
>
>  High authority check rates are usually due to private authority
> lookups.  A high rate is often found in systems that have migrated
> from a S/38.
>
>  They may also occur when new applications have been integrated into a
>
>  production system without the private authorities being removed.
>
>  Recovery  . . . :   An authority count above the guideline is
> acceptable
> if your security scheme requires private authorities.  A change to
> your security scheme may result in a change to the authority check
> rate. Therefore, you should investigate unexpected increases in the
> cpu utilization due to an increased authority check rate. To avoid
> high authority check rates, eliminate private authorities wherever
> possible.
>
> ==> we have an AS/400 720 and nevery migrated from a S/38.
> I would like to eliminate the private authorities but where to start
> ??
>
> Thanks
> Chris
>
>
> -----Original Message-----
> From: midrange-l-admin@midrange.com
> [mailto:midrange-l-admin@midrange.com] On Behalf Of Andy
> Nolen-Parkhouse
> Sent: 06 September 2001 03:02
> To: midrange-l@midrange.com
> Subject: RE: Private Authority
>
>
> Chris,
>
> Is there any more indication of what the problem is?  Limits on
> private authorities for an individual profile are in the hundreds of
> thousands, does your report give any context?
>
> The PRTPVTAUT command will allow you to list out the private
> authorities for various objects if that would be helpful.
>
> Regards,
> Andy Nolen-Parkhouse
>
> > Subject: Private Authority
> >
> > Hi there
> >
> > I did run the Performance Tools and checked afterwards the
> > performance
>
> > Adviser. There it tells me that I exceeded the limit of private
> > Authorities with 216. Can anybody tell me what I can do (which
> > command to run) in order to rectify
> > the problem ?
> >
> > Thanks
> > Chris
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing

> list To post a message email: MIDRANGE-L@midrange.com To subscribe,
> unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives at
> http://archive.midrange.com/midrange-l.
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives at
> http://archive.midrange.com/midrange-l.
>
>

_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@midrange.com To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.