Re: DB2/400 to DB2 on WinNT/2K

[MWalter@xxxxxxxxxxxxxxx]

Brian,

I'm by no means an expert in this area and there are many members of this
list who are way more qualified than I to respond, but this seems like XML
should be a pretty good fit here. I will follow this thread very closely as
we may have a requirement similar to yours in the near future.

Good luck,

Mark


Mark Walter
Sr. Programmer/Analyst
Hanover Wire Cloth a div of CCX, Inc.
mwalter@hanoverwire.com
http://www.hanoverwire.com
717.637.3795 Ext.3040



                    "Brian D. James"
                    <bjames@isdsolution        To:     <MIDRANGE-L@midrange.com>
                    s.net>                     cc:
                    Sent by:                   Subject:     DB2/400 to DB2 on 
WinNT/2K
                    midrange-l-admin@mi
                    drange.com


                    08/20/01 11:14 AM
                    Please respond to
                    midrange-l






What is the preferred method to transfer data between DB2/400 and DB2 on
WinNT/2000?

A WinNT/2000 server running DB2 acts as a front end accepting transactions
and performing initial data validation. We need to transfer these
transactions to the AS/400 and process them. Once the processing is
complete, any changes to the validation tables need to be sent to the
WinNT/2K server.  Other than an FTP transfer, what is a reliable method to
move this data between the two boxes? They are connected through a VPN over
the internet.

Data Joiner has been ruled out because it requires the netfinity card
within
the AS/400. Would DB2 Connect be appropriate for this situation?

TIA,

==
Brian D. James
Email: bjames@compuserve.com

_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com