Tr: SLIP connection

["Eric" <epanissard@xxxxxx>]

Hi Chuck

 

> What is the error code of the "software problem recorded..." message, and what is the help text for this message?

The error code is CPI93B0 and there is no more information in the help text, just the ID of the problem. I try to use WRKPRB and I report the problem to IBM (through the line). They report the problem was unknow for us and tell me to send a tape with the APAR lib on it to IBM. I did it but I guess it will take a long time before I get an answer.

 

I know you said you are on the latest cum, was this installed recently?

The latest cum was installed this week but I got the problem before.

 

Has anything happened with QUSRSYS  recently?

We didn't do anything on QUSRSYS since a long time.

 

Thanks for your help

___________________________________________________________________
Eric PANISSARD
Responsable du Département iSeries 400
 
INFORMATIQUE DE TAHITI
6, rue Leboucher - BP 1744 - 98713 PAPEETE
TAHITI - POLYNESIE FRANCAISE
Tel : (689) 54 40 40           Fax : (689) 43 37 90
E-mail : EPanissard@idt.pf
___________________________________________________________________

----- Original Message -----

From: Eric

To: PArmand@idt.pf

Sent: Friday, July 27, 2001 9:17 AM

Subject: Re: SLIP connection

Eric,

 

What is the error code of the "software problem recorded..." message, and what is the help text for this message?

 

I know you said you are on the latest cum, was this installed recently?  

 

Has anything happened with QUSRSYS  recently?

 

Chuck

----- Original Message -----

From: Eric

To: Mailing List AS400

Sent: Thursday, July 26, 2001 6:57 PM

Subject: SLIP connection

If somebody can help me it will be great :

 

I have an SLIP line (Win98 PC to AS400) on a AS400/model 170/OS V4R5/last cum C1100450

few days ago the OS was in V4R3 and every was working very well.

Today when I want to start the line (STRTCPPTP) I get every time the following messages in Qsysopr (translated from French to English) :

    - Starting TCP/IP point-to-point session for profile SLIPANS.              
    - TCP/IP point-to-point session for profile SLIPANS ended.                 
    - software problem recorded for QTOCPPSM

 

I tried to create a new (same) line directly in V4R5 but I got the same problem.

Here is the configuration of the line :

CRTLINASC LIND(my_line) RSRCNAME(my_rsc) ONLINE(*NO) +               
         INTERFACE(*RS232V24) CNN(*SWTPP) VRYWAIT(*NOWAIT) +           
         AUTOCALL(*NO) BITSCHAR(8) PARITY(*NONE) STOPBITS(1) +         
         DUPLEX(*FULL) ECHO(*NONE) LINESPEED(19200) MODEM(*NORMAL) +   
         MODEMRATE(*FULL) SWTCNN(*DIAL) AUTOANS(*NO) +                 
         AUTODIAL(*YES) DIALCMD(*OTHER) SETMDMASC('*NONE') +           
         CALLNBR(*NONE) INACTTMR(*NOMAX) MAXBUFFER(1500) +             
         THRESHOLD(*OFF) FLOWCNTL(*HARDWARE) IDLTMR(1) +               
         DSRDRPTMR(6) AUTOANSTYP(*DTR) CTSTMR(25) RMTANSTMR(60) +      
         CMNRCYLMT(2 5)

 

Here is the point to point *ANS profile :

Name . . . . :   MY_PROFILE       

Text . . . . :                                                        
TCP/IP information:                                                   
  Protocol type . . . . . . . . . . . . . . . . . . . :   *SLIP       
  Local interface address . . . . . . . . . . . . . . :   1.1.1.1     
  Remote IP address . . . . . . . . . . . . . . . . . :   2.2.2.2     
  Maximum transmission unit . . . . . . . . . . . . . :   576         
  Allow proxy ARP . . . . . . . . . . . . . . . . . . :   N           
  Add default route . . . . . . . . . . . . . . . . . :   N           
Physical line information:                                            
  Line description  . . . . . . . . . . . . . . . . . :   MY_LINE   
  Line type . . . . . . . . . . . . . . . . . . . . . :   *ASYNC      
  Autocreate controller and device  . . . . . . . . . :   Y           
Modem information:                                                    
  Use a modem . . . . . . . . . . . . . . . . . . . . :   Y           
    Modem information name:                                           
      MultiTech 28800 Multimodem

     Modem initialization string:                                       
       AT&D2&C1X4V1Q0S7=70$BA0$SB19200&S1                               
     Modem reset string:                                                
       AT&F                                                             
     Modem answer command:                                              
       ATS0=2                                                           
 Script source information:                                             
   Use connection dialog script  . . . . . . . . . . . :   Y            
     Member  . . . . . . . . . . . . . . . . . . . . . :   ANSWIN95     
     File  . . . . . . . . . . . . . . . . . . . . . . :   QATOCPPSCR   
       Library . . . . . . . . . . . . . . . . . . . . :     QUSRSYS    
     ASCII character set identifier  . . . . . . . . . :   00819        
 Local system security:                                                 
   Allow IP datagram forwarding  . . . . . . . . . . . :   N            
   System access authorization list  . . . . . . . . . :   AUTSLIP          

 

Thank for your help,                                                                                 

 

___________________________________________________________________
Eric PANISSARD
Responsable du Département iSeries 400
 
INFORMATIQUE DE TAHITI
6, rue Leboucher - BP 1744 - 98713 PAPEETE
TAHITI - POLYNESIE FRANCAISE
Tel : (689) 54 40 40           Fax : (689) 43 37 90
E-mail : EPanissard@idt.pf
___________________________________________________________________