RE: Printing Bar Codes

[Buck Calabro <Buck.Calabro@xxxxxxxxxxxx>]

Lenny B wrote:
>Can anyone tell me if there is a way to print Bar Codes from the 
>AS/400 to a dot matrix printer, say an OKIDATA 321 or similar, 
>attached via an HP Jet Direct?
I would strongly recommend using AFP to do this, but if you insist on
sending your own control codes, Phil Hall has published how he did it on his
web site: <http://www.execpc.com/~pbhall/index.html>  The archives have
several instances of this question (I will add it to the FAQ).  Search for
HP5 or ESC.

Buck Calabro
Commsoft; Albany, NY
Visit the Midrange archives and FAQ at http://www.midrange.com
"Where so many hours have been spent convincing myself that I am right,
 is there not some reason to fear that I may be wrong?" -- Jane Austen
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---