RE: IBM model 3290/2

["Urbanek, Marty" <Marty_Urbanek@xxxxxxxxxxxx>]

Justin,

BlackBox.com lists IC009 Twinax->Coax balun, but it says must be used in
pairs, so I don't know it would work for the application you have in mind.
Would the datastream be compatible? Or would you just configure the devd as
a 3270-family device? 

That could be a cool display if you could get it to work. I think we used to
have one of those at a place I worked and you could configure it to split
the screen top/bottom and/or left/right for up to 4 concurrent sessions on
the screen at the same time.

-Marty

------------------------------

Date: Thu, 19 Jul 2001 10:57:56 -0500
From: "Haase, Justin C." <Justin.Haase@Kingland.com>
Subject: IBM model 3290/2

Folks,

I found the coolest thing on eBay, had to have it.  An old flat-panel plasma
display from a coax machine (Sys370 at the time).  Anyone know if it's
possible to get a converter from twinax to coax so I could run this baby on
one of the 400s around here?  It's almost 18" across, BRIGHT amber pixels,
so so cool.  Heavy too.  Thanks for your help in advance.

Justin C. Haase
Midrange Systems Engineer - Kingland Systems Corporation
IBM Certified AS/400 Systems Administrator
phone - 641.355.1035
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---