Fw: Remote Control panel on 820

In our data center AS/400, and now iSeries, is often the odd one out, and in
constant need of defence versus Netfinity, SP2, RS/6000.
This includes a not properly working PC Console/Remote control, the space
the systems take up, and 3494 connectivity needing APPC (all other systems
connect with TCP/IP).

Best,
Bernd

----- Original Message -----
From: "Philipp Rusch" <Philipp.Rusch@rusch-edv.de>
Sent: Tuesday, November 28, 2000 10:47 AM
Subject: Re: Remote Control panel on 820


> Hello Al, hi Dwayne,
>
> I can only agree with Al Barsa, I do not recommend anything else
> than a original dumb terminal console with a simple twinax controller
> to my customers. Everytime somebody sold something different
> (because twinax is not "modern" or "chic" enough to sales people)
> the first thing that did not function correctly was that damn beast to
> have a look at what was wrong with the machine ...
>
> Regards from germany, Philipp Rusch
>
>
>  -----------------------------------------------------------------
> | EDV Beratung Rusch          EDP Consulting Rusch                |
> | Philipp Rusch               Mailto: Philipp.Rusch@rusch-edv.de  |
> | Am Errlich 9                WWW   : http://www.rusch-edv.de/    |
> | D-61191 Rosbach,                                                |
> | Germany                                                         |
> | Phone: (+49) 6003 3972      Mobile : (+49) 172 89 86 230        |
> | Fax  : (+49) 6003 3795                                          |
> |                                                                 |
>  -----------------------------------------------------------------
>
>
>
> "Al Barsa, Jr." schrieb:
>
> > At 04:00 PM 11/27/00 +0800, you wrote:
> >
> > If anyone from IBM Rochester is reading this, just delete it now.
> >
> > Remote console doesn't work well.  (These words were developed by my
> > advisors, who asked that my other comments regarding absorption be
> > withdrawn.)  I would suggest that you do not waste your time.
> > Look for alternative solutions that are predicted to work better, but
are
> > yet unannounced.
> >
> > Al
> > >Hi All !!
> > >
> > >We're shortly going to be installing an LPAR'd 820 with a PC for the
Ops
> > >Console and Remote Control Panel, however a curious little item in
> > >'CA4155081 Operations Console Setup' has us wondering.  It states that
"For
> > >AS/400e servers 270, 820, 830, and 840, the remote control panel runs
only
> > >under Windows NT.  For other AS/400e servers, the remote control panel
runs
> > >under Windows 95, Windows 98, Windows NT Workstation 4.0 or later, and
> > >Windows 2000 professional.'.
> > >
> > >We'd really like to install Win2000 on the Ops Console, and are just
> > >wondering if the above statement is absolutely correct.  I can't
understand
> > >why it would work under WinNT but not under Win2000.  Does anyone have
> > >remote Control Panel working under Win2000 ??
> > >
> > >Thanks in Advance
> > >
> > >
> > >Dwayne Lindner
> > >Senior Analyst - Data Centre
> > >Wesfarmers Rural Division
> > >184 Railway Parade, Bassendean WA 6054
> > >Ph: (08) 9273 5365
> > >Email: dwayne.lindner@writ.wesfarmers.com.au
> > >
> >
> > Al Barsa, Jr. - Account for Midrange-L
> > Barsa Consulting Group, LLC.
> > 400 > 390
> >
> > Phone:          914-251-1234
> > Fax:            914-251-9406
> > http://www.barsaconsulting.com
> > http://www.taatool.com
> >






+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---