× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  • Subject: Re: CISC to RISC and Excessive Logical I/O
  • From: Pete Massiello <pmassiello@xxxxxxxxxxxxxxxx>
  • Date: Wed, 20 Jun 2001 11:10:48 -0400
  • Organization: OS Solutions

Did you look to see if you are at the current CUM level, and the most recent
Database Group PTF?  Also, please don't be insulted, but did you check to make
sure the access paths are ok?  Make sure that it is not building an access path
each time you open the file.  This could be due to one of 2 reasons, Access path
maintenance is set to *REBLD or the access path is damaged (ie you killed a
RGZPFM ).


    JMHO

        Pete Massiello

"Law, Tom" wrote:

> We are doing a CISC to RISC conversion from version 3.2 to 4.5.  We are
> having some slow response times in some transactions.  We were finding that
> DB CPU was getting upwards of 100%.  When looking at the traces (PEX,
> performance, smtrace, DBmonitor), we found that simple transactions were
> getting upwards of 100,000 to over a 1,000,000 logicals I/O's with less than
> 320 SYNC reads.  The same functions on the CISC systems were usually less
> than a 1,000 and no problems.
>
> Data was restored to the RISC systems using the backup created from the
> UPGRADE2 function on the CISC box.  I used the RSTLIB command for the data
> libraries.  The data looks correct after the restore.  The only thing I can
> think of that is common among different transactions is that the logicals
> are not correct.  Could the logicals be the culprit?
>
> We have had IBM look at the problem, but so far it can't be explained.
>
> Any info would be greatly appreciated.
>
> Thanks
>
> Thomas A. Law Jr.
>
> Sr. Systems Programmer
>
> NACCO Materials Handling Group, Inc.
> Americas MIS - Danville
> 1813 E. Voorhees St.
> Danville, IL. 61832
> 217-443-7622
> 217-443-7657 Fax
> 217-444-9936 Pager
> E-mail: actlaw@nmhg.com
>
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---

--
Pete Massiello
OS Solutions International
Phone: (203)-744-7854  Ext 11.
http://www.os-solutions.com
mailto:pmassiello@os-solutions.com


+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.