RE: What about the PLIC?

[Glenn Ericson <Glenn-Ericson@xxxxxxx>]

At 02:54 PM 06/04/2001 -0400, Walden H. Leverich 
wrote:
> I'm curious about the answer to Charly's
> question too, but let me
> expand/change it, can I take his two option 21 saves (one from each
> partition) and restore them to two different machines (one partition on
> one
> machine and one partition on another?)

Walden, YES you can do  either. even to  another partition on
the same machine if you  like.


> -Walden
>
> -----Original Message-----
> From: Charly Jones
> [mailto:charly301@hotmail.com]
> Sent: Sunday, June 03, 2001 11:32 PM
> To: MIDRANGE-L@midrange.com
> Subject: Re: What about the PLIC?
>
>
>
> So, does this mean that if I configure a system with two
> partitions, load up a bunch
> of stuff in each partition, and then do an option 21 save in each
> partition, that I will be able to take those 2 option 21 saves
> and recreate the whole mess on a similar set of hardware
> at a recovery site?  Or will I have to be doing the partition
> magic and configuring the hardware before I can restore at
> the recovery site?  Has anyone looked at the V5R1 Backup +
> Recovery manual to see what the procedure is?
>
> Seems like the less that has to be done at the recovery site,
> the better.  Also seems like a partitioned system will
> be harder to setup at a recovery site.
>
> Charly
>
> >From: barsa@barsaconsulting.com
> >
> >With all due respect to my friend Glenn PLIC is a layer of SLIC, and
> it is 
> >saved with a SAVSYS, which is a part of a save option 21.
> >
> >Al
> >
>
> _________________________________________________________________
> Get your FREE download of MSN Explorer at
> http://explorer.msn.com
>
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to
> MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to
> MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
> MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
> david@midrange.com
> +---
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to
> MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to
> MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
> MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
> david@midrange.com
> +--- 


Glenn
________________________
Glenn Ericson,    
Phoenix Consulting LLC ,  New York , NY USA
Ph.(718)898 9805  Fx .(718)446 1150
mailto:Glenn-Ericson@att.net
__________________________