RE: Client Access vs CAE

[Eric Sundell PMI <ESundell@xxxxxxxxxxxxx>]

Title: Message

A few, nothing that could not be worked out, one interesting thing that puzzled us is we could not be on the 5250, and connect to the internet at the same time, we had to add a route to the PC because the 5250 was trying to go out on the internet to find the AS400.

 

Transfers work the same way, and even have a few new features. SSL, a transfer wizard to upload etc.

-----Original Message-----
From: Wills, Mike N. (TC) [mailto:MNWills@taylorcorp.com]
Sent: Thursday, May 31, 2001 2:14 PM
To: 'MIDRANGE-L@midrange.com'
Subject: RE: Client Access vs CAE

I guess we will have to do some testing on our end to make things will work okay. Has anyone had problems that we should be aware about when changing over to CAE? Or did it generally go smoothly? 

 

Ah...one other question...Do file transfers work any differently for CA to CAE?

 

Mike

-----Original Message-----
From: Eric Sundell PMI [mailto:ESundell@pmi.delta.org]
Sent: Wednesday, May 30, 2001 6:43 PM
To: 'MIDRANGE-L@midrange.com'
Subject: RE: Client Access vs CAE

Netserver is separate from CAE, you set up shares in Navigator to only the folders and printers you want to share. There is lots of info at IBM's Netserver site, In the scenario below it would prompt you for the password, when you map a drive to Netserver you can specify a different user name.

CAE also has RUNRMTCMD so you shouldn't have a problem.

Eric Sundell
AS400/PC Specialist