Re: AS/400 as FTP Server

["Patrick Townsend" <patownsend@xxxxxxxxxxxxxx>]

Are you sure you don't mean the TFTP server? A lot of devices use TFTP for
firmware updates. However, you can use the CFGTCP command, then option 20,
then the option you want to configure FTP and/or TFTP. Then use the
STRTCPSVR command to start the server. Be careful with STRTCPSVR - the
default is to start all of the servers. You probably only want to start the
FTP/TFTP server.

Patrick
---
IBM AS/400 communications, FTP automation, and eCommerce
software and consulting services.

http://www.patownsend.com

----- Original Message -----
From: "Buzz Fenner" <bfenner@jonesborocwl.org>
To: "Midrange Discussion" <Midrange-L@midrange.com>
Sent: Wednesday, March 14, 2001 8:47 AM
Subject: AS/400 as FTP Server


> I've been given some files to update the firmware on thin clients.  Where
> would I find information on configuring the FTP server on the AS/400
(v4r5)
> to allow this?  I'm using CA Express v4r4 so I have the Operations
Navigator
> on my desktop.
>
> Thanks In Advance.
>
> Buzz Fenner
> mailto:bfenner@jonesborocwl.org
>
>
>
>
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
david@midrange.com
> +---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---