RE: Full Duplex Problem

Try using *auto for linespeed and duplex.  It seems to auto configure to
switches/hubs better.   You mentioned you are connecting to a router, does
this mean your router has a built in hub/switch?

Christopher K. Bipes    mailto:ChrisB@Cross-Check.com
Sr. Programmer/Analyst  mailto:Chris_Bipes@Yahoo.com
CrossCheck, Inc.        http://www.cross-check.com
6119 State Farm Drive   Phone: 707 586-0551 x 1102
Rohnert Park CA  94928  Fax: 707 586-1884

If consistency is the hobgoblin of little minds, only geniuses work here.
Karen Herbelin - Readers Digest 3/2000

-----Original Message-----
From: Jeff Crosby [mailto:jlcrosby@fwi.com]
Sent: Wednesday, December 20, 2000 11:58 AM
To: Midrange Mailing List
Subject: Full Duplex Problem


I'm testing on my new RISC box.  The LAN is connected via 10/100 routers
(ethernet).  The ethernet line on the AS/400 is configured as
LINKSPEED(100M), LINESPEED(100M), and DUPLEX(*FULL).

However, the full duplex LED on the router does not light for whatever
port I connect the AS/400 to.  I know the LEDs all work because I can
switch the cords around, and it's always the port with the AS/400
connected that has the full duplex light go off.  Anyone have any idea
why that port would not register as full duplex?  The IBM CE is stumped.

-- 
-Jeff
The opinions expressed are my own and not necessarily 
the opinion of my company.  Unless I say so.
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---