Re: New Laser Printers

Be careful of the Infoprint in dusty environments. We've had nothing but
trouble with a new 17ppm Infoprint that runs in our warehouse. I just spoke
with the IBM tech who repairs them for us, and he told me that several of
his customers have been experiencing the same problems.

They seem to operate just fine in a normal office environment.

We have had good success with a variety of HP laser's running in the same
warehouse.


John Taylor
Canada


----- Original Message -----
From: "Avi Hecht" <avi_hecht@hotmail.com>
To: <MIDRANGE-L@midrange.com>
Sent: Monday, December 18, 2000 11:36
Subject: Re: New Laser Printers


> Hi Mark,
>
> I have installed an IBM Infoprint and humble opinion  is that
> its best since IBM created all drivers needed so you dont have
> the need to customize the sucker ...
>
> Avi
> ----- Original Message -----
> From: "Mark Walter" <mwalter@netrax.net>
> To: <MIDRANGE-L@midrange.com>
> Sent: Wednesday, December 13, 2000 10:15 PM
> Subject: RE: New Laser Printers
>
>
> > We use HP 8100DN's They work real well although they are a little
> expensive.
> >
> > -----Original Message-----
> > From: Jeff Crosby [SMTP:jlcrosby@fwi.com]
> > Sent: Tuesday, December 12, 2000 4:55 PM
> > To: Midrange Mailing List
> > Subject: New Laser Printers
> >
> > The time has come for us to get some new laser printers for attachment
> > to our AS/4 . . . er, e(logo)server iseries.
> >
> > Our current lasers are Anzac 3017s, which are HP Laserjet 4si with a
> > twinax interface.  The printers were once wonderful but are simply worn
> > out.  Anzac used to be a good company, but their service has gotten so
> > terrible over the last couple of years that I would not use Anzac
> > printers if they _gave_ them to us.
> >
> > I'm interested in something HP, probably, unless someone convinces me
> > otherwise.  No more twinax, I want cat 5 cabling.  I assume that
> > printers still require an 'interface' card to work properly with an
> > AS/40 . . . &#@*%#+ I mean an e(logo)server iseries.  They need to be
> > heavy duty printers, probably 2 of them, in the 20ppm range.
> >
> > What printers are you using these days?  What do you recommend?  Thanks.
> >
> > --
> > -Jeff
> > The opinions expressed are my own and not necessarily
> > the opinion of my company.  Unless I say so.
> > +---
> > | This is the Midrange System Mailing List!
> > | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> > | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> > | To unsubscribe from this list send email to
> MIDRANGE-L-UNSUB@midrange.com.
> > | Questions should be directed to the list owner/operator:
> david@midrange.com
> > +---
> >
> > +---
> > | This is the Midrange System Mailing List!
> > | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> > | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> > | To unsubscribe from this list send email to
> MIDRANGE-L-UNSUB@midrange.com.
> > | Questions should be directed to the list owner/operator:
> david@midrange.com
> > +---
> >
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
david@midrange.com
> +---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---