Re: Emulex pocket que -- MIDRANGE-L

In TCP/IP printing (not via LPR/LPD) with a device type
*LAN (DEVCLS *LAN and LANATTACH *IP) an important parameter
is the port (keyword PORT) since is the number AS400 will
use to dialog with the printer. If your printer server has
a declared port number available you probably will be able
to print (also check out the firewall if you got one
running in your network).
Otherwise the only way is to use a remote queue (LPR or
LPD) but it's not the same.
Anyway this is working with a laser printer connected via
print server (HP 500X): 
    DEVD        MORANDINI
    OPTION      *BASIC   
                *PRT     
    DEVCLS      *LAN     
    TYPE        3812     
    MODEL       1        
    LANATTACH   *IP      
    PORT        9100     
    ATTACH      *DIRECT  
    ONLINE      *YES     
    FONT                 
                11       
                *NONE    
    FORMFEED    *AUTOCUT 
    SEPDRAWER   *FILE    
    SEPPGM      *NONE    
    PRTERRMSG   *INQ     
    MSGQ        *CTLD    
                QSYSOPR  
                 QSYS   
    ACTTMR      170      
    INACTTMR    *SEC15   
    LINESPEED   19200    
    WORDLEN     8        
    PARITY      *NONE    
    STOPBITS    1        
    TRANSFORM   *YES     
    MFRTYPMDL   *HP4         
    PPRSRC1     *LETTER      
    PPRSRC2     *LETTER      
    ENVELOPE    *NUMBER10    
    ASCII899    *NO          
    IMGCFG      *NONE        
    CHRID       *SYSVAL      
    RMTLOCNAME  192.168.2.91 
    WSCST       *NONE       
    USRDFNOBJ   *NONE       
                 *NONE     
    USRDTATFM   *NONE       
    SYSDRVPGM   *HPPJLDRV   

this is working fine on our AS (V4.4)
I also noticed a problem using ports 9101 and 9102: you
must set the timer on your print server to 0.
I hope it can help
Bye

--- KenEggleston@debssystems.com wrote:
> I have an Emulex pocket que Model NQP0 that hooks to a
> centronics parallel
> port on a printer and is accessed via twisted pair port.
> I'm trying to get
> this to work on our 400. I can address it via the arp
> command and even
> print to it via Windows NT, and the 400 can ping it, but
> I can't get it to
> print. I did a crtdevprt using all the settings as
> suggested in an IBM
> document "Setting up a 3812 PJL TCP/LAN printer". I asked
> our IBM support
> and he suggested a half of dozen PTF's for printing but
> before doing that I
> wanted to check here. If anyone has any info on using
> these I would
> appreciated it.
> 
> Thank you,
> keneggleston@debssystems.com
> 
> 
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to
> MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to
> MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
> MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list
> owner/operator: david@midrange.com
> +---


__________________________________________________
Do You Yahoo!?
Get Yahoo! Mail - Free email you can access from anywhere!
http://mail.yahoo.com/
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---