Problem with Netvista 2200 settings / NSM V2.1

Hello all,

We recently upgraded to v4r4 on a 720 and with this upgrade we
installed a Netvista 2200 Network station from IBM.
My problem is to get changed settings for that station to be applied
to the 5250 sessions on that device.
The profile is stored and I can see my changes when calling the setup
pulldown menu on the sessions, but they are not used.
We would like to change the display size to 132x27 for wide screens,
and the setting for the enter key is unused for the former terminal
users ...
Installation details: Ethernet, Network Station Manager V2.1 (5648C07),
Admin Webserver started and config for defaults is ok.
Cum PTF is C0147440.
We also have the boot code update installed on the network station.

Any help appreciated.

TIA, Philipp Rusch


 -----------------------------------------------------------------
| EDV Beratung Rusch          EDP Consulting Rusch                |
| Philipp Rusch               Mailto: Philipp.Rusch@rusch-edv.de  |
| Am Errlich 9                WWW   : http://www.rusch-edv.de/    |
| D-61191 Rosbach,                                                |
| Germany                                                         |
| Phone: (+49) 6003 3972      Mobile : (+49) 172 89 86 230        |
| Fax  : (+49) 6003 3795                                          |
|                                                                 |
 -----------------------------------------------------------------
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---