Re: 5494 connection

Todd kidwell wrote:

Pretty simple ... Go CMNCFG and start with option 1. This is the "short"
version of configuring a remote controller.  You could proably use the
existing line & controller descriptions that was used for the Perl
controller.

The 5494 has one setting for dial vs lease and is fairly simple to set.

To determine "what" method of connection depends on the cable installed
on the box. Here is the list of optional cables.

 ---------------------
                                    Specify    Feature   Accessory
        Type                         Code       Code     Part Number
        ----                         ----       ----      -------
    EIA RS-232 D, V.24/V.28          1850       3050      02F9660
    EIA RS-232 D, V.24/V.28-Japan    1851       3051      02F9661
    EIA RS-232 D, V.24/V.28-Germany  1852       3052
    CCITT V.35                       1853       3053      02F9676
    CCITT V.35-France                1854       3054
    CCITT X.21                       1855       3055      02F9670

In order to do point to point "dial" you will need 1850.


> Can anyone help me out with the necessary configuration for the line, 
>controller (both AS/400 and the 5494 controller), and modems?

> +---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---