Clive,
Can you explain how you did this? I have tried this and cannot get
sessions to show up in the new interactive subsystem because QINTER has
*all in the workstation type entries. How did you get around this? Thanks
in advance.
At 02:21 PM 5/11/00 +0100, you wrote:
>Hi,
>
> I have
come across a similar problem, unexplained seizure of QINTER and
>various other problems. The way I worked around this problem was
to create
>multiple QINTER subsystems as QINTERVxxx which are clones of
QINTER. In each
>of these subsystems I have Device name entries for QPADEV000*,
QPADEV001*,
>QPADEV002* e.t.c i.e QINTERV001 has QPADEV001 to QPADEV009
access. This has
>allowed us to load balance and if problems occur (Which they
have not since)
>then it only affects 10 users at a time. It has other benefits
too i.e. the
>subsystems start a LOT quicker....
>
> Hope
this helps,
>
>Regards,
>
>Clive Griffiths.
>
>-----Original Message-----
>From: owner-midrange-l@midrange.com
>Sent: 11 May 2000 12:58
>To: 'MIDRANGE-L@midrange.com'
>Subject: QINTER subsystem locking up
>
>
>Can someone please wave a magic wand ?
>
>My Qinter subsystem monitor keeps locking, client access sessions won't
>start, active sessions hang or drop out; the processor is at 100% normally
>so that's no clue. It seems that if I sign on at the console (DSP01 in
>QCTL) I can see the joblog of the Qinter sbs mon job, it is nearly always
>reporting a combination of CPF1195, CPF4128, CPF5263, CPF5170 messages. I'm
>fully up to date with group PTFs and CumPTF level.
>
>I am running a 510-2143, V4R3 system, 768MB memory (*INTERACT has 378000K).
>There are no twinax devices, they are all client access and QPADEV* sessions
>(160 ish of them).
>
>I have worked on the problem with Assist/400, but other than PTFs, I got no
>fix.
>
>Has anyone else experienced this infuriating problem, and got a fix ?
>
>Kind regards,
>Jeff Bull.
>Senior AS/400 Support Consultant (AS/400)
>Midas Kapiti International Ltd
>
>Tel: 44 (0) 175 370 8224
>Fax: 44 (0) 175 357 0233
>Email: Jeff.Bull@Midas-Kapiti.Com << == Replies to
>The views and opinions expressed in this e-mail are the senders own and do
>not necessarily represent the views and opinions of Misys Plc.
>
>This email message is intended for the named recipient only. It may be
>privileged and/or confidential. If you are not the intended named recipient
>of this email then you should not copy it or use it for any purpose, nor
>disclose its contents to any other person. You should contact Midas-Kapiti
>International as shown below so that we can take appropriate action at no
>cost to yourself.
>
>Midas-Kapiti International Ltd, Key West, 53-61 Windsor Road, Slough,
>Berkshire, SL1 2DW, England
>Email: Postmaster@midas-kapiti.com Tel: (44) 1753 573244 Fax: (44) 1753
>570233
>Midas-Kapiti International Ltd is registered in England and Wales under
>company no. 971479
>
>
>
>
>+---
>| This is the Midrange System Mailing List!
>| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
>| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
>| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
>| Questions should be directed to the list owner/operator:
>david@midrange.com
>+---
>
>**********************************************************************
>This email and any files transmitted with it are confidential and
>intended solely for the use of the individual or entity to whom they
>are addressed. If you have received this email in error please notify
>the system manager.
>
>This footnote also confirms that this email message has been swept by
>MIMEsweeper for the presence of computer viruses.
>
>**********************************************************************
>+---
>| This is the Midrange System Mailing List!
>| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
>| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
>| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
>| Questions should be directed to the list owner/operator: david@midrange.com
>+---
>
Stan "The Crippler" Wilburn
Mid-Range Systems Engineer
Rock Hill Telephone Company
803-323-6366
E-Mail: Stan.Wilburn@RHTelco.com
midrange.com
