|
midrange.com
Dan,
I just transferred a large save file from the AS/400 to PC:
81792480 bytes transferred in 328.231 seconds. Transfer rate 249.191
KB/sec.
I then transferred the same save file to another AS/400 on the same
network (10, not 100):
81792480 bytes transferred in 127.947 seconds. Transfer rate 639.267
KB/sec.
I think you should be seeing better throughput! Have you talked to the
network folks to see what they have to say?
Patrick
"Bale, Dan" wrote:
>
> That bugger took 3 hours and 40 minutes to transmit. It was 59.7MB. From
> the log file:
>
> 61202064 bytes transferred in 12555.306 seconds. Transfer rate 4.875
> KB/sec.
>
> The save file had 115,913 records. 115,913 * 528 = 61,202,064. The DSPOBJD
> size was 59,785,216 (????).
>
> Using 1480 bytes per frame, would you calculate the number of puts as:
> 1) 61,202,064 / 1480 = 41,352.7 *or*
> 2) 1480 / 528 = 2 whole records per frame; 115,913 / 2 = 57,957
> Based on the "guesstimate" that the number of puts was around 17,000 about
> two hours into the job, I'm not sure either of these calculations work.
>
> I think I'm going to set up a test whereby I submit a batch job to do an FTP
> and another batch job to do a DSPJOB OPTION(*OPNF) in a loop that runs every
> 15 seconds and run some stats on the collected data to see if there's a
> pattern I can use.
>
> Other suggestions are greatly appreciated!
>
> - Dan Bale
>
> > -----Original Message-----
> > From: Patrick Townsend [SMTP:townsend@patownsend.com]
> > Sent: Monday, May 01, 2000 8:24 PM
> > To: MIDRANGE-L@midrange.com
> > Subject: Re: Correlating *SAVF "records" to FTP job I/O count
> >
> >
> > Yes, 1496 bytes. Subtracting TCP/IP frame headers you are probably
> > transferring 1480 bytes per frame. How long does it take to transfer a
> > 58 meg save file? Just takes a few minutes here between AS/400 and
> > Windows NT PC.
> >
> > Patrick
> >
> > "Bale, Dan" wrote:
> > >
> > > What if I see that the Maximum Frame Size of the line description is
> > 1496?
> > > What does 1496 mean? 1496 bytes? I don't have the authority to run a
> > comm
> > > trace here. Not sure anyone else here would want to go through the
> > bother.
> > >
> > > TIA,
> > > - Dan Bale
> > >
> > > > -----Original Message-----
> > > > From: Patrick Townsend [SMTP:townsend@patownsend.com]
> > > > Sent: Monday, May 01, 2000 3:15 PM
> > > > To: MIDRANGE-L@midrange.com
> > > > Subject: Re: Correlating *SAVF "records" to FTP job I/O count
> > > >
> > > > Dan,
> > > >
> > > > I believe the transfer record size of an FTP transfer will be
> > controlled
> > > > by the Maximum Frame Size of the line description. Save file record
> > > > lengths are 528, but I believe FTP should send multiple records with
> > > > each transfer. You can see what the AS/400 is doing by putting a
> > > > communications trace on the line (STRCMNTRC). End the trace with
> > > > ENDCMNTRC and then print it with PRTCMNTRC. There is a header for each
> > > > TCP/IP frame, but you will get an idea of the size this way.
> > > >
> > > > Patrick
> > > > --
> > > > IBM AS/400 communications, FTP automation, and network security
> > > > software and consulting services.
> > > >
> > > > http://www.patownsend.com
> > > >
> > > > "Bale, Dan" wrote:
> > > > >
> > > > > Is there a known, constant, record-blocking factor used when
> > > > transmitting a
> > > > > save file from one AS/400 to another via FTP?
> > > > >
> > > > > I am using FTP to transmit save files from plant boxes to the
> > division
> > > > box.
> > > > > One I have running right now is 56MB. The system operator is
> > wondering
> > > > how
> > > > > much longer the FTP will run. When I look at the job running FTP,
> > it
> > > > shows
> > > > > the save file being transmitted as an open file (WRKJOB option 14)
> > and
> > > > shows
> > > > > the I/O count at 12,417. If I could correlate the save file's
> > number of
> > > > > records to the I/O count, I would be able to estimate the time
> > remaining
> > > > to
> > > > > complete the transmission.
> > > > >
> > > > > RTFM? Please point the way.
> > > > >
> > > > > - Dan Bale
> >
> > --
> > IBM AS/400 communications, FTP automation, and network security
> > software and consulting services.
> >
> > http://www.patownsend.com
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---
--
IBM AS/400 communications, FTP automation, and network security
software and consulting services.
http://www.patownsend.com
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.
