Re: Complete Save via CL Command?

Al,

dumb question, why isn't dtaq info being saved?  

Don in DC

On Sun, 30 Apr 2000, Al Barsa, Jr. wrote:

> At 04:11 PM 4/30/00 -0700, you wrote:
> 
> John,
> 
> When SAVSTG was written, it was a faster way to save the entire system 
> (including queue data, which cannot be saved otherwise without 
> extraordinary procedures) than a GO SAVE option 21.  Today with a 
> sufficiently fast enough processor, enough memory, and a fast tape drive, 
> GO SAVE option 21 is better (although queue data is omitted).
> 
> Al
> 
> 
> >Henrik,
> >
> >Henrik Krebs wrote:
> > >
> > > Maybe SAVSTG? Check it.
> > >
> > > I'm not sure if it is possibly to submit a job to controlling subsystem 
> > with an
> > > ENDSBS(*ALL) + SAVSTG. Anyway SAVSTG is not a 'good' save command, 
> > which is why I don't
> > > know much about it.
> >
> >SAVSTG takes a complete (bit level) system snapshot, and expects
> >to restore that snapshot to essentially the same hardware
> >configuration.  It's usefull if you want to quickly save and
> >replace an entire disk configuration, but it is worthless to the
> >point of dangerous for daily backups.  You can't selectivley
> >restore (libraries or objects), and you could be extremely hard
> >pressed to restore to an alternate machine.
> >
> >jte
> >
> >
> >
> >
> >
> >
> > >
> > > Regards
> > >
> > > Henrik Krebs
> > >
> > > ------------------------------------------------------------
> > > Henrik Krebs
> > > IT Consultant (IBM AS/400)
> > > Phone +45 55 44 26 50
> > > Mobile +45 40 88 83 23
> > > Email: hkrebs@hkrebs.dk
> > > Web: http://www.hkrebs.dk/
> > > Snailmail: Kokhaven 8, DK-4736  Karrebaeksminde
> > > ------------------------------------------------------------
> > >
> > > >Date: Wed, 26 Apr 2000 09:46:33 -0500
> > > >From: "Michele Reinkemeyer"<mreinkemeyer@mbsbooks.com>
> > > >Subject: Complete Save via CL Command?
> > > >
> > > >I was told (when I first started dealing with the AS/400 and still 
> > barely knew
> > > >how to spell it) that there is a way to run a complete system save 
> > using a CL
> > > >command through a job scheduled entry.  Is anyone familiar with 
> > this?  If so,
> > > >would you be willing to share that CL command?  I want to implement 
> > such on 3 of
> > > >my AS/400's since I am an hr and a half from office and don't care to 
> > drive in
> > > >each weekend.
> > > >
> > > >Thanks in advance,
> > > >
> > > >Michele R
> > >
> > > +---
> > > | This is the Midrange System Mailing List!
> > > | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> > > | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> > > | To unsubscribe from this list send email to 
> > MIDRANGE-L-UNSUB@midrange.com.
> > > | Questions should be directed to the list owner/operator: 
> > david@midrange.com
> > > +---
> >
> >--
> >John Earl                               johnearl@400security.com
> >The PowerTech Group                     206-575-0711
> >PowerLock Network Security              www.400security.com
> >--
> >+---
> >| This is the Midrange System Mailing List!
> >| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> >| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> >| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> >| Questions should be directed to the list owner/operator: david@midrange.com
> >+---
> 
> 
> 
> +--------------------------------------------------+
> | Please do not send private mail to this address. |
> | Private mail should go to barsa@ibm.net.         |
> +--------------------------------------------------+
> 
> Al Barsa, Jr. - Account for Midrange-L
> Barsa Consulting, LLC.        
> 400 > 390
> 
> Phone:                914-251-1234
> Fax:          914-251-9406
> http://www.barsaconsulting.com
> http://www.taatool.com
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---
> 

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---