"system consule" question re-write

Hi,
I have rewritten questions aboubt how to set up the "system consule"
correctly
I need the CL commands to get me out of trouble as of course I have only
worked on VB C/S programming for the AS/400 over the last year and a half .
I must own up despite being on this list for that long I  have not got very
far into learning aboubt OS/400 but now with a
new risc machine--model 500 with a 2617 ethernet card I hope to get
inspired!

Auto-config set up the "system consule" for me.On my first IPL I
connected via  a 3197C dual session display  to the "Wrong card" its a
feature #9149 (Twinaxial Passthru Adapter) .No wonder it would not come
alive with a sign on screen until I
set the 2nd address to port 0/1!

Anyway I have 3 x 6050 Workstation IOP cards installed Card Pos 3,6,7.How to
I
set up one of these to be Port0/address 0.

I have a full hardware dump printout from the previous owner listing all the
resourses and logial
names-which I dont understand?ie 6050 CARDs installed on
Card Pos 3=resourcename WS03 ,CTL06--LOGIAL ADDRESS 1/1/0/7-/////
Card Pos 6= resource name WS02,CTL01--LOGIAL ADDRESS 1/1/0/4-/////,
Card Pos 7=resource name WS04,CTL02--LOGIAL ADDRESS 1/1/0/2-/////

at the moment Im set up on via 9149 port0,add1--possibly on CTL04
Subsystem QCTL
Display      DSP01
I somehome need to move this to one of the 6050 cards-Would the 6050
installed in Card Pos 6 be the right one to use?
AutoConfig is on and
Im running V3R7 on a 9406-model500

cheers Dave

DSPLOG: history
Automatic configuration created controller description CTL01
Description for device DSP03 created.
Bus failure during operation with I/O processor
Controller CTL01 contacted on line *N
Device DSP03 not varied on

Additional Message Info
Bus failure during operation with I/O processor.All I/O processors on that
system bus are unable to communicate with the system processor.
Technical description….:The table ID is B600FA00. The Unit Reference code is
X’6900’.
The product activity log ID is X’80000B14’.
The problem log ID is 0011453444




+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---