Update and new mess created - !!!!reAdvise needed "Bus failure during operation with I/O processor"

I think I have found the problem,now how do I get out of trouble Iam
connected via  a 3197C dual session display  to the "Wrong card" its a
feature #9149 (Twinaxial Passthru Adapter) .No wonder it would not come
alive with a sign on screen until I
set the 2nd address to port 0/1!

Anyway I have 3 6050 Workstation IOP cards installed Frame 3,6,7.How to I
set
up one of these to be Port0/address 0.

I have a full hardware dump printout listing all the resourses and logial
names-which I dont understand?ie 6050 CARDs installed on Frame 3=resource
name WS03 --LOGIAL ADDRESS 1/1/0/7-/////?
Frame 6 = resource name WS02,CTL01--LOGIAL ADDRESS 1/1/0/4-/////,Frame7
=resource name WS04--LOGIAL ADDRESS 1/1/0/2-/////

at the moment Im set up on via 9149 port0,add1
Subsystem QCTL
Display      DSP01
I somehome need to move this to one of the 6050 cards.AutoConfig is on and
Im running V3R7 on a 9406-model500

cheers Dave


-----Original Message-----
From: James W. Kilgore <eMail@James-W-Kilgore.com>
To: MIDRANGE-L@midrange.com <MIDRANGE-L@midrange.com>
Date: Monday, 24 April 2000 04:56
Subject: Re: Advise needed "Bus failure during operation with I/O processor"


>David,
>
>I don't recall if this is the same situation that happened to me once,
>but the previous owner yanked out some cards before giving up the
>machine and the IPL would try testing for them and log a failure.
>
>Check your rack config and make sure it matches the hardware you really
>have, and in the right slots.
>
>HTH,
>
>DAVID BULOG wrote:
>>
>> Hi all,
>> My model 500 IPLs correctly both in manual mode and normal mode.
>> In manual mode I get error message "Bus failure during operation with I/O
>> processor" and it clears after pressing enter.
>>
>+---
>| This is the Midrange System Mailing List!
>| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
>| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
>| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
>| Questions should be directed to the list owner/operator:
david@midrange.com
>+---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---