How do I set up NT40 on IPCS 6617 with 2 LAN cards?

I have a customer who has a 6617 IPCS with two 100M ethernet cards.  I've 
configured an NWSD (SERVER2) which uses resource CC02 (which is the one 
with the 2 LAN adapters - LIN04 with Ethernet port CMN04, LIN05 with 
Ethernet port CMN05), a LIND (ETHLINE1), set up an interface in CFGTCP to 
use ETHLINE1, set up an address in CFGTCP (192.16.1.1) and configured 
Client Access on each PC so that they can connect and get a sign on 
screen.  That all works marvelously.

I want to set up a BDC on the NT network, and assign it address 
192.16.1.8, using the other NIC in the IPCS.

I installed the AS/400 Integration for NT Server and went thru the 
configuration process.  Right off the bat, it wanted me to vary off the 
CC02, which I did.  After going thru all the gyrations, it created a NWSD 
on the 400 called NTAS400.  When I vary it on, I get the NT sign on 
screen, just as I expect.  BUT - I can't vary on SERVER1.  The error 
message tells me that resource CC02 is already varied on (which is 
correct).  In order for the PCs to login to the 400 I have to vary off the 
NTAS400 server description and vary on the SERVER1 server description.  I 
have obviously misconfigured the NT40 installation (not surprising since 
it's the first one I've done).

How do I configure so that I can have the AS400 on one of the NIC cards, 
and the NT40 Server on the other, and have both running at the same time?

Also, how do I install to use ASP 2 (where we _lots_ of space) instead of 
ASP 1?
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---