Re: Firewall/400 problems, not starting properly and can't view web interface -- MIDRANGE-L

Hello Nathan,

Does the monitor job of your firewall stay on status *TIMW (in
wrkactjob)
 or does it reach the *SELW status after STRNWSAPP.

Here a brief 1-2-3 list for starting all over again:

1. Firewall doesnt't start correctly: Configuration file is not found.
 (symptom: in monitor joblog there are no messages of loaded cfg files
and/or paths)
2. NWSD  VRYCFG  *OFF
3. edit NWSD of your Firewall as follows:
   Config file/library: QAISADPK/QIPSINT . then VRYCFG *ON .......
4. SBMNWSCMD,   md e:\firewall\fwmigr44.bas, Servername, *base
5. NWSD VRYCFG  *OFF
6. Undo your changes on NWSD of 3).
7. NWSD  VRYCFG *ON

Now you should be up and running !

(I got these tips from a colleague of mine, Dr. Johannes Bley from
BMU/Germany,
we had these problems three weeks ago on a 720 with V4R4 on it)

Good luck from germany, Philipp Rusch


 -----------------------------------------------------------------
| EDV Beratung Rusch          EDP Consulting Rusch                |
| Philipp Rusch               Mailto: Philipp.Rusch@rusch-edv.de  |
| Am Errlich 9                WWW   : http://www.rusch-edv.de/    |
| D-61191 Rosbach,                                                |
| Germany                                                         |
| Phone: (+49) 6003 3972      Mobile : (+49) 172 89 86 230        |
| Fax  : (+49) 6003 3795                                          |
|                                                                 |
 -----------------------------------------------------------------


Nathan Simpson schrieb:
> 
> Hi,
> 
> We have Firewall/400 (V4R3) installed on our V4R3 AS/400 and we have a
> problem.
> 
> When I installed it there were no messages indicating an error.
> 
> I have started the Firewall from the web interface and I think some things
> are not quite right even though it doesn�t display an error.
> 
> After starting the firewall the *NWS is ACTIVE.
> 
> I have 3 lines, 1 x Token Ring and 2 x Ethernet. The Token Ring Line is
> ACTIVE, but the 2 Ethernet lines are only VARIED ON. What should I see
> here???
> 
> The Job Log says all has started OK.
> 
> Should there be an Interface for each Ethernet card. One exists for the
> Token Ring internal LAN.
> 
> Also when I click on the Configuration or Administration icons in my browser
> I receive a message saying I don�t have permissions to view this directory
> or page. I am logged on as QSECOFR.
> 
> The storage space exists, but how many should there be??
> 
> Also we have a IPCS with NT installed and in Ops Nav under File Systems
> there is a folder named QNTC. Under here is the name of the IPCS plus all of
> the disks and shares etc. Should this also exist for the firewall.
> 
> Does anyone have any experience with Firewall/400.
> 
> TIA.
> 
> Regards,
> 
> Nathan Simpson
> Australian Wool Handlers
> nathansimpson@optusnet.com.au
> 
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---