Re: CA/400 Prestart job ending by itself (QNPSERVR)

Scott,

I checked QUSER and the limit is 3176 with the current used of 876 which jumped
to 2148 when I started QNPSERVR. I am going to try doubling the limit for a 
while
and see if that helps.

Thanks.

Roger Vicker, CCP

Scott Mildenberger wrote:

> You might want to look at the max storage allowed for user profile quser.
> We haven't seen this exact problem but have seen similar caused by quser
> reaching it's max storage limit.  If the storage used is near the max try
> bumping the max up a bit to see if that helps.
>
> >
> > I've got a customer with a model 620 running V4R2M0 that is being accessed
> > by twinax PCs using CA/400 V3R2M0 (current SP) but the network print job
> > in QCMN (QNPSERVR) keeps ending. I found a note on IBM that a few PTFs
> > were required and applied them. Otherwise I haven't been able to find
> > anything (RTFM or Midrange-L archives) that explains this. I can STRPJ
> > QCMN QIWS/QNPSERVR and everyone can use the AS/400 as a print server for a
> > while but eventually the the job(s) end.

--
*** Vicker Programming and Service *** Have bits will byte *** www.vicker.com 
***

The quest continues! ;-)



+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---