× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  • Subject: RE: Data Center relocation
  • From: Chris Bipes <rpg@xxxxxxxxxxxxxxx>
  • Date: Fri, 21 Jan 2000 08:00:43 -0800

I have never moved an AS400 data center but I have purchased new AS400 and
shipped the old equipment to our D/R site.  We packed the old equipment into
the new equipment's boxes and shipped it.  We sent along one set of complete
system backup tapes.  After the equipment arrived, we flew out carrying the
second set of complete system backups.  Of course this was a small model
200.  Later we replaced the 200 with a new 170 which was shipped to our
headquarters where we installed all the application etch.  We then labeled
everything, packed back into the original shipping containers and shipped to
our remote site.  Again we sent one set of tapes with the box and carried
the second set with us.

Since we are a 24x7x365.25 operation I would not move our data center,
instead I would purchase new equipment for the new location and just move
the data.

Christopher K. Bipes     mailto:ChrisB@Cross-Check.com
Sr. Programmer/Analyst   mailto:Chris_Bipes@Yahoo.com
CrossCheck, Inc.         http://www.cross-check.com
6119 State Farm Drive    Phone: 707 586-0551 x 1102
Rohnert Park CA  94928 Fax: 707 586-1884

*Note to Recruiters
Neither I, nor anyone that I know of, is interested in any new and/or
exciting positions. Please do not contact me.
ckovarik@bellsouth.net on 01/20/2000 06:28:04 PM
Please respond to MIDRANGE-L@midrange.com@Internet
To:     midrange-l@midrange.com@Internet
cc:      
Fax to: 
Subject:        Data Center relocation

Our company is reviewing the possibility (costs/benefits analysis) of
relocating its data center.  This could include all Networking
components as well as an AS/400.  Has anyone had any experience in
relocating an AS/400?  Any ideas as to costs associated with?  TIA

CMK
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.