× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  • Subject: Subject: Re: TCP/IP Disconnected Sessions With Rumba
  • From: "MARYLOU ATWELL" <MATWELL@xxxxxxxxxxxxxxxxxxx>
  • Date: Mon, 10 Jan 2000 16:06:12 -0500

David, 

WE have been using Version 5.2 of the WallData Rumba product line.  I hope that 
helps. 

MaryLou  

------------------------------
Date: Thu, 6 Jan 2000 21:22:53 +1300
From: "DAVID BULOG" <d2ba@xtra.co.nz>
Subject: Re: TCP/IP Disconnected Sessions With Rumba
Thanks MaryLou,
I cant help feeling that the Walldata product is flakey in that area.
I have to hardcode in the HLLAPI error handling for disconnected sessions.
My question to you is what version of Rumba ie 95/NT and were they
configured fot TCP/IP.
cheers Dave
- - ----------
 >.us>
  > Hi,
 >
 > Our district used Rumba for quite some time after IBM dropped it from the
 > Client Access line some time ago. It did provide alot easier set up for
 > the printer emulations. I did find though that there was difficulty on a
 > user reconnecting if for whatever reason the session ended. Be it a pc
 > lock up or some sort of disconnect. The only way I was ever able to
fix
 > it was to have the user call me, then I would go thru "wrkcfgsts *dev
Find
 > that pc description, and vary it off, and then vary it back on. After
 > calls to WallData, it was never fixed, and I was quite unhappy with that
 > aspect of the product. Yes, there are parts that are great, however, in
a
 > WAN of 400 pc's, and they might all disconnect at the same time,
 > well.... I have switched back to Client Access for that among other
 > reasons. I'm not totally thrilled with Client Access but, at least
 > I'm supported with it in some ways. I just was never given a reason or
a
 > way to fix it...
 >
 >
  > > Happy New Year all
 > > At work on our big boxs we are using Rumba Office/95 connected via
TCP/IP
 > > as a term emulator.I am having a problem where out of the blue the
Rumba
 > > Session gets disconnected (you get a blank screen-no sign on).Upon
queri
 > > the AS/400 my session still shows varied on.
 > > I was wondering if I can have a list of commands to check any
suggested
 > > parameters on a "Virtual Controller".
 > > Using Netsoft Elite via SNA does not give us any problems only TCP/IP
!!
 
 







Date: Sun, 9 Jan 2000 21:30:33 -0600
From: rgh@us.ibm.com 
Subject: Re: TCP/IP Disconnected Sessions With Ru

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---

As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.